sinowealth: add definition for repeated clicks

Seems like it should work - but it does not...

.circleci/config.yml

@@ -0,0 +1,269 @@
+libratbag_references:
+  build_dependencies: &build_dependencies
+    FEDORA_DEP_BUILD: gcc gcc-c++ meson dbus-daemon glib2-devel json-glib-devel libevdev-devel libudev-devel libunistring-devel python3-devel python3-evdev swig
+    FEDORA_DEP_TEST: check-devel python3-gobject python3-lxml valgrind diffutils
+    FEDORA_DEP_DOC: python3-sphinx python3-sphinx_rtd_theme
+    UBUNTU_DEP_BUILD: gcc g++ meson pkg-config systemd libevdev-dev libglib2.0-dev libjson-glib-dev libsystemd-dev libudev-dev libunistring-dev python3-dev python3-evdev swig
+    UBUNTU_DEP_TEST: check python3-gi python3-lxml valgrind
+    ARCH_DEP_BUILD: meson swig glib2 libevdev libudev.so libunistring json-glib python python-evdev python-gobject
+    ARCH_DEP_TEST: check valgrind python-lxml
+  default_settings: &default_settings
+    working_directory: ~/libratbag
+    environment:
+      LANG: C.UTF-8
+  build_default: &build_default
+    name: Build
+    command: |
+      rm -rf build
+      meson build ${MESON_PARAMS}
+      meson configure build
+      ninja -v -C build ${NINJA_ARGS}
+    environment:
+      MESON_PARAMS: --prefix=/usr
+  build_buildtype_plain: &build_buildtype_plain
+    run:
+      <<: *build_default
+      name: Build with buildtype plain
+      environment:
+        MESON_PARAMS: --prefix=/usr -Dbuildtype=plain
+  build_buildtype_release: &build_buildtype_release
+    run:
+      <<: *build_default
+      name: Build with buildtype release
+      environment:
+        MESON_PARAMS: --prefix=/usr -Dbuildtype=release
+  build_and_test: &build_and_test
+    run:
+      <<: *build_default
+      name: Build and test
+      environment:
+        NINJA_ARGS: test
+  build_with_docs: &build_with_docs
+    run:
+      <<: *build_default
+      name: Build with documentation
+      environment:
+        MESON_PARAMS: -Ddocumentation=true
+  install: &install
+    run:
+      name: Installing
+      command: ninja -C build install
+  check_install: &check_install
+    run:
+      name: Checking installation
+      command: |
+        PREFIX=/usr/local/
+        diff -u <(cd data/devices; ls *.device) <(cd $PREFIX/share/libratbag; ls *.device)
+  check_uninstall: &check_uninstall
+    run:
+      name: Checking if any files are left after uninstall
+      command: |
+        PREFIX=/root/test_install
+        meson build_install --prefix=$PREFIX
+        ninja -C build_install install
+        ninja -C build_install uninstall
+        if [ -d $PREFIX ]
+        then
+          tree $PREFIX
+          exit 1
+        fi
+  export_logs: &export_logs
+    store_artifacts:
+      path: ~/libratbag/build/meson-logs
+  start_dbus: &start_dbus
+    run:
+      name: Start dbus daemon
+      command: |
+        mkdir /run/dbus
+        /usr/bin/dbus-daemon --system --fork
+
+save_date: &save_date
+  run:
+    name: Save date
+    command: date +%F > /tmp/date
+
+fedora_save_cache: &fedora_save_cache
+  save_cache:
+    key: fedora-cache-v1-{{ checksum "/tmp/date" }}
+    paths:
+      - /var/cache/dnf
+
+fedora_fetch_cache: &fedora_fetch_cache
+  restore_cache:
+    keys:
+      - fedora-cache-v1
+
+fedora_install: &fedora_install
+  run:
+    name: Install prerequisites
+    command: |
+        echo keepcache=1 >> /etc/dnf/dnf.conf
+        dnf install -y git ${FEDORA_DEP_BUILD} ${FEDORA_DEP_TEST}
+        sed -i 's/systemd//' /etc/nsswitch.conf
+
+fedora_settings: &fedora_settings
+  <<: *default_settings
+  steps:
+    - *save_date
+    - *fedora_fetch_cache
+    - *fedora_install
+    - checkout
+    - *start_dbus
+    - *build_and_test
+    - *install
+    - *check_install
+    - *check_uninstall
+    - *build_buildtype_plain
+    - *build_buildtype_release
+    - *export_logs
+    - *fedora_save_cache
+  environment:
+    *build_dependencies
+
+arch_save_cache: &arch_save_cache
+  save_cache:
+    key: arch-cache-v1-{{ checksum "/tmp/date" }}
+    paths:
+      - /var/cache/pacman/pkg
+
+arch_fetch_cache: &arch_fetch_cache
+  restore_cache:
+    keys:
+      - arch-cache-v1
+
+arch_settings: &arch_settings
+  <<: *default_settings
+  steps:
+    - *save_date
+    - *arch_fetch_cache
+    - run:
+        name: Install prerequisites
+        command: pacman -Syu --noconfirm --noprogressbar --needed base-devel git tree ${ARCH_DEP_BUILD} ${ARCH_DEP_TEST}
+    - *start_dbus
+    - checkout
+    - *build_and_test
+    - *install
+    - *check_install
+    - *check_uninstall
+    - *export_logs
+    - *arch_save_cache
+  environment:
+    *build_dependencies
+
+ubuntu_settings: &ubuntu_settings
+  <<: *default_settings
+  steps:
+    - run:
+        name: Install prerequisites
+        command: |
+          export DEBIAN_FRONTEND=noninteractive
+          apt-get update
+          apt-get install -y git ${UBUNTU_DEP_BUILD} ${UBUNTU_DEP_TEST}
+    - checkout
+    - *start_dbus
+    - *build_and_test
+    - *install
+    - *check_install
+    - *check_uninstall
+    - *build_buildtype_plain
+    - *build_buildtype_release
+    - *export_logs
+  environment:
+    *build_dependencies
+
+doc_build: &doc_build
+  <<: *default_settings
+  steps:
+    - *fedora_fetch_cache
+    - *fedora_install
+    - run:
+        name: Install documentation build-deps
+        command: dnf install -y ${FEDORA_DEP_DOC}
+    - checkout
+    - *build_with_docs
+    - *export_logs
+    - store_artifacts:
+        path: ~/libratbag/build/doc/html
+    - persist_to_workspace:
+        root: build
+        paths:
+          - doc/html/*
+  environment:
+    *build_dependencies
+
+docs_deploy: &docs_deploy
+  <<: *default_settings
+  steps:
+    - *fedora_fetch_cache
+    - run:
+        name: Install prerequisites
+        command: dnf install -y git tree
+    - checkout
+    - attach_workspace:
+        at: build
+    - run:
+        name: Setup the deploy SSH key
+        command: |
+          ssh-add -L | tail -n1 > ~/.ssh/deploy.pub
+          cat <<EOF > ~/.ssh/config
+          Host github.com
+            IdentityFile /root/.ssh/deploy.pub
+            IdentitiesOnly yes
+          EOF
+    - run:
+        name: Clone doc repository
+        command: |
+          cd ~
+          git clone ssh://git@github.com/${CIRCLE_PROJECT_REPONAME}/${CIRCLE_PROJECT_REPONAME}.github.io
+    - run:
+        name: Copy the doc, commit and push
+        command: |
+          set +e
+          cd ~/${CIRCLE_PROJECT_REPONAME}.github.io
+          \cp -r ~/${CIRCLE_PROJECT_REPONAME}/build/doc/html/* .
+          if ! git diff-index --quiet HEAD --; then
+            git config --global user.email "libratbag@librabtag.github.io"
+            git config --global user.name "The libratbag crew"
+            git add .
+            git commit -m "update docs from ${CIRCLE_SHA1}"
+            git push
+          fi
+
+version: 2
+jobs:
+  fedora_32:
+    <<: *fedora_settings
+    docker:
+      - image: fedora:32
+  arch:
+    <<: *arch_settings
+    docker:
+      - image: archlinux
+  ubuntu_20_04:
+    <<: *ubuntu_settings
+    docker:
+      - image: ubuntu:20.04
+  doc_build:
+    <<: *doc_build
+    docker:
+      - image: fedora:32
+  doc_deploy:
+    <<: *docs_deploy
+    docker:
+      - image: fedora:32
+
+
+workflows:
+  version: 2
+  compile_and_test:
+    jobs:
+      - ubuntu_20_04
+      - arch
+      - fedora_32
+      - doc_build
+      - doc_deploy:
+          requires:
+            - doc_build
+          filters:
+              branches:
+                only: master

.copr/Makefile

@@ -1,12 +0,0 @@
-outdir ?= .
-spec   ?= libratbag.spec
-
-srpm:
-	dnf -y install git-core rpm-build
-	git archive --format=tar.gz --prefix=libratbag-snapshot/ \
-	    -o $(outdir)/libratbag-snapshot.tar.gz HEAD
-	rpmbuild -bs $(spec) \
-	    --define "_sourcedir $(outdir)" \
-	    --define "_srcrpmdir $(outdir)" \
-	    --define "gitdate $$(date +%Y%m%d)" \
-	    --define "shortcommit $$(git rev-parse --short=7 HEAD)"

.copr/libratbag.spec

@@ -1,259 +0,0 @@
-%global udevdir %(pkg-config --variable=udevdir udev)
-%global commit      <full 40-char hash>
-%global shortcommit %(c=%{commit}; echo ${c:0:7})
-%global gitdate %(date +%%Y%%m%%d)
-
-Name:           libratbag
-Version:        0.18^%{gitdate}git%{shortcommit}
-Release:        1%{?dist}
-Summary:        Programmable input device library
-License:        MIT
-URL:            https://github.com/libratbag/libratbag
-Source0:        libratbag-snapshot.tar.gz
-
-BuildRequires:  git gcc gcc-c++
-BuildRequires:  meson pkgconfig
-BuildRequires:  libevdev-devel
-BuildRequires:  libudev-devel
-BuildRequires:  pkgconfig(udev) pkgconfig(glib-2.0) pkgconfig(json-glib-1.0)
-BuildRequires:  check-devel
-%ifarch %{valgrind_arches}
-BuildRequires:  valgrind
-%endif
-BuildRequires:  systemd
-BuildRequires:  python3 python3-devel python3-gobject
-BuildRequires:  python3-lxml python3-evdev swig
-BuildRequires:  libunistring-devel
-
-%description
-libratbag is a library that allows to configure programmable
-mice.
-
-%package        ratbagd
-Summary:        DBus daemon to access programmable input devices
-Obsoletes:      libratbag < 0.9.900
-Requires:       python3-evdev python3-gobject
-
-%description    ratbagd
-The ratbagd package contains a dbus daemon to access and configure
-programmable input devices, primarily gaming mice.
-
-%package        -n liblur
-Summary:        Logitech Unifying Receiver library
-
-%description    -n liblur
-The liblur package contains libraries and tools to access and
-configure the Logitech Unifying Receivers. The functionality
-are mainly listing, pairing and un-pairing Logitech devices
-attached to a receiver.
-
-%package        -n liblur-devel
-Summary:        Development files for liblur
-Requires:       liblur%{?_isa} = %{version}-%{release}
-
-%description    -n liblur-devel
-The liblur-devel package contains libraries and header files for
-developing applications that use liblur.
-
-%prep
-%autosetup -n libratbag-snapshot
-
-# hack until rhbz#1409661 gets fixed
-%{!?__global_cxxflags: %define __global_cxxflags %{optflags}}
-
-%build
-# s390x builds sometimes fails during the tests, let just disable those
-%ifarch s390x
-%meson -Dudev-dir=%{udevdir} -Ddocumentation=false -Dtests=false
-%else
-%meson -Dudev-dir=%{udevdir} -Ddocumentation=false
-%endif
-%meson_build
-
-%check
-%meson_test
-
-%install
-%meson_install
-
-
-%ldconfig_scriptlets -n liblur
-
-%files ratbagd
-%license COPYING
-%{_bindir}/ratbagctl
-%{_bindir}/ratbagd
-%dir %{_datadir}/libratbag
-%{_datadir}/libratbag/*.device
-%{_mandir}/man1/ratbagctl.1*
-%{_mandir}/man8/ratbagd.8*
-%{_datadir}/dbus-1/system.d/org.freedesktop.ratbag1.conf
-%{_datadir}/dbus-1/system-services/org.freedesktop.ratbag1.service
-%{_unitdir}/ratbagd.service
-
-%files -n liblur
-%license COPYING
-%{_libdir}/liblur.so.*
-%{_bindir}/lur-command
-%{_mandir}/man1/lur-command.1*
-
-%files -n liblur-devel
-%{_includedir}/liblur.h
-%{_libdir}/liblur.so
-%{_libdir}/pkgconfig/liblur.pc
-
-%changelog
-%changelog
-* Thu Nov 05 2026 Drath <you@example.com> - 0.18^20261105git<shortcommit>-1
-- Git snapshot with G502 X Plus device file
-
-* Thu Jul 16 2026 Fedora Release Engineering <releng@fedoraproject.org> - 0.18-6
-- Rebuilt for https://fedoraproject.org/wiki/Fedora_45_Mass_Rebuild
-
-* Fri Jan 16 2026 Fedora Release Engineering <releng@fedoraproject.org> - 0.18-5
-- Rebuilt for https://fedoraproject.org/wiki/Fedora_44_Mass_Rebuild
-
-* Thu Jul 24 2025 Fedora Release Engineering <releng@fedoraproject.org> - 0.18-4
-- Rebuilt for https://fedoraproject.org/wiki/Fedora_43_Mass_Rebuild
-
-* Thu Mar 06 2025 David Abdurachmanov <davidlt@rivosinc.com> 0.18-3
-- Properly check valgrind arches
-
-* Mon Jan 20 2025 Fedora Release Engineering <releng@fedoraproject.org> - 0.18-2
-- Rebuilt for https://fedoraproject.org/wiki/Fedora_42_Mass_Rebuild
-
-* Fri Jan 03 2025 Peter Hutterer <peter.hutterer@redhat.com> - 0.18-1
-- libratbag 0.18
-- Revert upstream change to /sbin
-
-* Thu Jul 18 2024 Fedora Release Engineering <releng@fedoraproject.org> - 0.17-7
-- Rebuilt for https://fedoraproject.org/wiki/Fedora_41_Mass_Rebuild
-
-* Wed Jun 26 2024 Marcin Juszkiewicz <marcin@juszkiewicz.com.pl> - 0.17-6
-- Backport remove of imp Python module to fix FTFBS on F40.
-
-* Thu Jan 25 2024 Fedora Release Engineering <releng@fedoraproject.org> - 0.17-5
-- Rebuilt for https://fedoraproject.org/wiki/Fedora_40_Mass_Rebuild
-
-* Sun Jan 21 2024 Fedora Release Engineering <releng@fedoraproject.org> - 0.17-4
-- Rebuilt for https://fedoraproject.org/wiki/Fedora_40_Mass_Rebuild
-
-* Fri Sep 08 2023 Peter Hutterer <peter.hutterer@redhat.com>
-- SPDX migration: license is MIT, we're good
-
-* Thu Jul 20 2023 Fedora Release Engineering <releng@fedoraproject.org> - 0.17-3
-- Rebuilt for https://fedoraproject.org/wiki/Fedora_39_Mass_Rebuild
-
-* Thu Jan 19 2023 Fedora Release Engineering <releng@fedoraproject.org> - 0.17-2
-- Rebuilt for https://fedoraproject.org/wiki/Fedora_38_Mass_Rebuild
-
-* Wed Nov 30 2022 Peter Hutterer <peter.hutterer@redhat.com> - 0.17-1
-- libratbag 0.17
-
-* Thu Jul 21 2022 Fedora Release Engineering <releng@fedoraproject.org> - 0.16-4
-- Rebuilt for https://fedoraproject.org/wiki/Fedora_37_Mass_Rebuild
-
-* Thu Jan 20 2022 Fedora Release Engineering <releng@fedoraproject.org> - 0.16-3
-- Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild
-
-* Thu Jul 22 2021 Fedora Release Engineering <releng@fedoraproject.org> - 0.16-2
-- Rebuilt for https://fedoraproject.org/wiki/Fedora_35_Mass_Rebuild
-
-* Fri Jun 25 2021 Peter Hutterer <peter.hutterer@redhat.com> 0.16-1
-- libratbag 0.16
-
-* Tue Jan 26 2021 Fedora Release Engineering <releng@fedoraproject.org> - 0.15-2
-- Rebuilt for https://fedoraproject.org/wiki/Fedora_34_Mass_Rebuild
-
-* Mon Sep 28 2020 Peter Hutterer <peter.hutterer@redhat.com> 0.15-1
-- libratbag 0.15
-
-* Tue Jul 28 2020 Fedora Release Engineering <releng@fedoraproject.org> - 0.14-2
-- Rebuilt for https://fedoraproject.org/wiki/Fedora_33_Mass_Rebuild
-
-* Thu May 21 2020 Peter Hutterer <peter.hutterer@redhat.com> 0.14-1
-- libratbag 0.14
-
-* Tue Feb 11 2020 Peter Hutterer <peter.hutterer@redhat.com> 0.13-1
-- libratbag 0.13
-
-* Wed Jan 29 2020 Peter Hutterer <peter.hutterer@redhat.com> 0.12-1
-- libratbag 0.12
-
-* Tue Nov 05 2019 Peter Hutterer <peter.hutterer@redhat.com> 0.11-1
-- libratbag 0.11
-
-* Mon Sep 16 2019 Peter Hutterer <peter.hutterer@redhat.com> 0.10-2
-- Add missing Requires for ratbagctl
-
-* Fri Aug 02 2019 Peter Hutterer <peter.hutterer@redhat.com> 0.10-1
-- libratbag 0.10
-
-* Fri Jul 26 2019 Peter Hutterer <peter.hutterer@redhat.com> 0.9.906-1
-- libratbag 0.9.906
-
-* Thu Jul 25 2019 Fedora Release Engineering <releng@fedoraproject.org> - 0.9.905-4
-- Rebuilt for https://fedoraproject.org/wiki/Fedora_31_Mass_Rebuild
-
-* Wed Jul 17 2019 Peter Hutterer <peter.hutterer@redhat.com> 0.9.905-3
-- Use python3-embed as dependency where available. Fixes FTBFS with python
-  3.8 (#1718290)
-
-* Thu Feb 28 2019 Peter Hutterer <peter.hutterer@redhat.com> 0.9.905-2
-- Fix meson options
-
-* Thu Feb 28 2019 Peter Hutterer <peter.hutterer@redhat.com> 0.9.905-1
-- libratbag 0.9.905
-
-* Fri Feb 01 2019 Fedora Release Engineering <releng@fedoraproject.org> - 0.9.904-2
-- Rebuilt for https://fedoraproject.org/wiki/Fedora_30_Mass_Rebuild
-
-* Thu Jan 24 2019 Peter Hutterer <peter.hutterer@redhat.com> 0.9.904-1
-- libratbag 0.9.904
-
-* Wed Sep 05 2018 Peter Hutterer <peter.hutterer@redhat.com> 0.9.903-1
-- libratbag 0.9.903
-
-* Fri Jul 20 2018 Peter Hutterer <peter.hutterer@redhat.com> 0.9.902-4
-- Add gcc to BuildRequires (#1604654)
-- Change to use the correct -Ddocumentation=false
-
-* Fri Jul 13 2018 Fedora Release Engineering <releng@fedoraproject.org> - 0.9.902-3
-- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
-
-* Tue Jun 19 2018 Miro Hrončok <mhroncok@redhat.com> - 0.9.902-2
-- Rebuilt for Python 3.7
-
-* Mon May 21 2018 Peter Hutterer <peter.hutterer@redhat.com> 0.9.902-1
-- libratbag 0.9.902
-
-* Fri Mar 23 2018 Peter Hutterer <peter.hutterer@redhat.com> 0.9.901-1
-- libratbag 0.9.901
-
-* Wed Feb 07 2018 Fedora Release Engineering <releng@fedoraproject.org> - 0.9-5
-- Rebuilt for https://fedoraproject.org/wiki/Fedora_28_Mass_Rebuild
-
-* Thu Aug 03 2017 Fedora Release Engineering <releng@fedoraproject.org> - 0.9-4
-- Rebuilt for https://fedoraproject.org/wiki/Fedora_27_Binutils_Mass_Rebuild
-
-* Wed Jul 26 2017 Fedora Release Engineering <releng@fedoraproject.org> - 0.9-3
-- Rebuilt for https://fedoraproject.org/wiki/Fedora_27_Mass_Rebuild
-
-* Wed Jun 07 2017 Benjamin Tissoires <benjamin.tissoires@redhat.com> 0.9-2
-- disable tests on s390x because they seem to fail without good reasons
-
-* Tue Jun 06 2017 Benjamin Tissoires <benjamin.tissoires@redhat.com> 0.9-1
-- libratbag v0.9
-- new manpage for lur-command
-
-* Tue May 09 2017 Benjamin Tissoires <benjamin.tissoires@redhat.com> 0.8-1
-- libratbag v0.8
-
-* Tue May 09 2017 Benjamin Tissoires <benjamin.tissoires@redhat.com> 0.7-3
-- add a hack for F24 and F25 to compile
-
-* Fri May 05 2017 Benjamin Tissoires <benjamin.tissoires@redhat.com> 0.7-2
-- Remove the generation of the documentation, we don't ship it
-
-* Thu May 04 2017 Benjamin Tissoires <benjamin.tissoires@redhat.com> 0.7-1
-- Initial Fedora packaging (rhbz#1309703)

.flake8

@@ -0,0 +1,3 @@
+[flake8]
+ignore = E402,E501
+exclude = .git,__pycache__,build,data,piper/piper.py

.github/actions/meson/action.yml

@@ -1,39 +0,0 @@
-# A Github Action to build a repository with meson
-name: "Setup and run meson"
-description: "Setup and run meson"
-inputs:
-  builddir:
-    description: "The build directory"
-    default: "builddir"
-  srcdir:
-    description: "The source directory"
-    default: "."
-  meson_args:
-    description: "Arguments passed to meson setup"
-    default: ""
-  meson_skip_test:
-    description: "Set to a nonempty string to skip meson test"
-    default: ""
-  meson_test_args:
-    description: "Arguments passed to meson test"
-    default: ""
-  meson_precmd:
-    description: "Set to 'sudo' to run with sudo"
-    default: ""
-  ninja_args:
-    description: "Arguments passed to ninja"
-    default: ""
-  ninja_precmd:
-    description: "Set to 'sudo' to run with sudo"
-    default: ""
-runs:
-  using: "composite"
-  steps:
-    - run: |
-        ${{inputs.meson_precmd}} meson setup ${{inputs.builddir}} ${{inputs.srcdir}} ${{inputs.meson_args}}
-        ${{inputs.meson_precmd}} meson configure ${{inputs.builddir}}
-        ${{inputs.ninja_precmd}} ninja -C ${{inputs.builddir}} ${{inputs.ninja_args}}
-        if [[ -z "${{inputs.meson_skip_test}}" ]]; then
-          ${{inputs.meson_precmd}} meson test -C ${{inputs.builddir}} --print-errorlogs ${{inputs.meson_test_args}};
-        fi
-      shell: bash

.github/actions/pkginstall/action.yml

@@ -1,17 +0,0 @@
-name: "Install packages"
-description: "Install a set of packages from sources"
-inputs:
-  apt:
-    description: "The package list to install with apt"
-  pip:
-    description: "The package list to install with pip"
-  pip_precmd:
-    description: "Set to the string 'sudo' to run through sudo"
-    default: ""
-runs:
-  using: "composite"
-  steps:
-    - run: sudo ${{ github.action_path }}/install-apt.sh ${{ inputs.apt }}
-      shell: bash
-    - run: ${{inputs.pip_precmd}} ${{ github.action_path }}/install-pip.sh ${{ inputs.pip }}
-      shell: bash

.github/actions/pkginstall/install-apt.sh

@@ -1,14 +0,0 @@
-#!/bin/bash -x
-
-# If called without arguments, just skip the rest
-if [[ -z "$@" ]]; then
-	exit
-fi
-
-# Don't care about these bits
-echo 'path-exclude=/usr/share/doc/*' > /etc/dpkg/dpkg.cfg.d/99-exclude-cruft
-echo 'path-exclude=/usr/share/locale/*' >> /etc/dpkg/dpkg.cfg.d/99-exclude-cruft
-echo 'path-exclude=/usr/share/man/*' >> /etc/dpkg/dpkg.cfg.d/99-exclude-cruft
-
-apt-get update
-apt-get install -yq --no-install-suggests --no-install-recommends $@

.github/actions/pkginstall/install-pip.sh

@@ -1,9 +0,0 @@
-#!/bin/bash -x
-
-# If called without arguments, just skip the rest
-if [[ -z "$@" ]]; then
-	exit
-fi
-
-python -m pip install --upgrade pip
-python -m pip install --upgrade "$@"

.github/workflows/main.yml

@@ -1,54 +0,0 @@
-name: linux
-
-on: [ push, pull_request ]
-
-env:
-  UBUNTU_DEP_BUILD: |
-    gcc g++ pkg-config systemd libevdev-dev libglib2.0-dev
-    libjson-glib-dev libsystemd-dev libudev-dev libunistring-dev
-    python3-dev python3-evdev swig python3-sphinx
-  UBUNTU_DEP_TEST: check python3-gi python3-lxml valgrind
-  PIP_PACKAGES: meson ninja libevdev pyudev pytest sphinx_rtd_theme black==25.12.0 ruff==0.15.12
-
-jobs:
-  build-and-dist:
-    runs-on: ubuntu-24.04
-    strategy:
-      matrix:
-        include:
-          - name: default
-            meson_args: ''
-          - name: plain
-            meson_args: '-Dbuildtype=plain'
-          - name: release
-            meson_args: '-Dbuildtype=release'
-          - name: documentation
-            meson_args: '-Ddocumentation=true'
-    steps:
-      - uses: actions/checkout@v4
-      - uses: ./.github/actions/pkginstall
-        with:
-          apt: $UBUNTU_DEP_BUILD $UBUNTU_DEP_TEST
-          pip: $PIP_PACKAGES
-      - name: meson test ${{matrix.meson_args}}
-        uses: ./.github/actions/meson
-        with:
-          meson_args: --prefix=$PWD/_instdir ${{matrix.meson_args}}
-          ninja_args: install
-      - name: check installation of data files
-        run:  diff -u <(cd data/devices; ls *.device) <(cd _instdir/share/libratbag; ls *.device)
-      - name: ninja uninstall
-        uses: ./.github/actions/meson
-        with:
-          meson_args: --prefix=$PWD/_instdir
-          ninja_args: uninstall
-      - name: check if any files are left after uninstall
-        run: (test -d _instdir && tree _instdir && exit 1) || exit 0
-      # Capture all the meson logs, even if we failed
-      - uses: actions/upload-artifact@v4
-        if: ${{ always() }}  # even if we fail
-        with:
-          name: 'meson test logs ${{ matrix.name }}'
-          path: |
-            builddir/meson-logs/testlog*.txt
-            builddir/meson-logs/meson-log.txt

.github/workflows/pages.yml

@@ -1,31 +0,0 @@
-name: pages
-
-on:
- push:
-   branches:
-     - master
-
-env:
-  UBUNTU_DEP_BUILD: gcc g++ pkg-config systemd libevdev-dev libglib2.0-dev libjson-glib-dev libsystemd-dev libudev-dev libunistring-dev python3-dev python3-evdev python3-pip swig python3-sphinx python3-sphinx-rtd-theme
-  PIP_PACKAGES: meson ninja
-
-jobs:
-  deploy:
-    runs-on: ubuntu-24.04
-    steps:
-      - uses: actions/checkout@v3
-      - uses: ./.github/actions/pkginstall
-        with:
-          apt: $UBUNTU_DEP_BUILD
-          pip: $PIP_PACKAGES
-      - name: Build docs
-        uses: ./.github/actions/meson
-        with:
-          meson_args: -Ddocumentation=true -Dtests=false
-          meson_skip_test: yes
-      - name: Deploy to GitHub Pages
-        uses: peaceiris/actions-gh-pages@v3
-        with:
-          github_token: ${{ secrets.GITHUB_TOKEN }}
-          publish_dir: ./builddir/doc/html/
-          allow_empty_commit: true

README.md

@@ -46,10 +46,6 @@ And to build or re-build after code-changes, run:
     ninja -C builddir
     sudo ninja -C builddir install
 
-To remove/uninstall simply run:
-
-    sudo ninja -C builddir uninstall
-
 Note: `builddir` is the build output directory and can be changed to any
 other directory name. To set configure-time options, use e.g.
 
@@ -173,3 +169,5 @@ libratbag is licensed under the MIT license.
 > Software is furnished to do so, subject to the following conditions: [...]
 
 See the COPYING file for the full license information.
+
+[![Build Status](https://circleci.com/gh/libratbag/libratbag.svg?style=shield&circle-token=d7c782e10d2d934b176da754f11b5105ea074f4a)](https://circleci.com/gh/libratbag/libratbag)

data/devices/asus-rog-buzzard.device

@@ -1,12 +0,0 @@
-[Device]
-Name=ASUS ROG GX860 Buzzard Mouse
-DeviceMatch=usb:0b05:1816
-DeviceType=mouse
-Driver=asus
-
-[Driver/asus]
-Profiles=3
-Buttons=10
-Leds=0
-Dpis=2
-DpiRange=100:8200@100

data/devices/asus-rog-chakram-core.device

@@ -1,14 +0,0 @@
-# ASUS ROG Chakram, but corded
-[Device]
-Name=ASUS ROG Chakram Core
-DeviceMatch=usb:0b05:1958
-DeviceType=mouse
-Driver=asus
-
-[Driver/asus]
-Profiles=3
-Buttons=5
-Leds=3
-Dpis=4
-DpiRange=100:16000@100
-Quirks=DOUBLE_DPI;STRIX_PROFILE

data/devices/asus-rog-chakram-x.device

@@ -1,16 +0,0 @@
-[Device]
-Name=ASUS ROG Chakram X
-DeviceMatch=usb:0b05:1a18;usb:0b05:1a1a
-DeviceType=mouse
-Driver=asus
-
-[Driver/asus]
-Profiles=5
-Buttons=14
-Leds=3
-Dpis=4
-Wireless=1
-DpiRange=100:36000@100
-Quirks=DOUBLE_DPI;RAW_BRIGHTNESS;SEPARATE_XY_DPI;SEPARATE_LEDS;BUTTONS_SECONDARY
-ButtonMapping=f0;f1;f2;0;0;e6;e8;e9;d0;d1;d2;d3
-ButtonMappingSecondary=0;0;ea;eb;ec;ed

data/devices/asus-rog-chakram.device

@@ -1,14 +0,0 @@
-[Device]
-Name=ASUS ROG Chakram
-DeviceMatch=usb:0b05:18e3;usb:0b05:18e5
-DeviceType=mouse
-Driver=asus
-
-[Driver/asus]
-Profiles=3
-Buttons=5
-Leds=3
-Dpis=4
-Wireless=1
-DpiRange=100:16000@100
-Quirks=DOUBLE_DPI;STRIX_PROFILE

data/devices/asus-rog-gladius2-origin-pink.device

@@ -1,13 +0,0 @@
-[Device]
-Name=ASUS ROG Gladius II Origin PNK LTD
-DeviceMatch=usb:0b05:18cd
-DeviceType=mouse
-Driver=asus
-
-[Driver/asus]
-Profiles=3
-Buttons=8
-Leds=3
-Dpis=2
-DpiRange=100:12000@100
-Quirks=DOUBLE_DPI

data/devices/asus-rog-gladius2-origin.device

@@ -1,14 +0,0 @@
-# "ASUS ROG Gladius II" without "DPI target button"
-[Device]
-Name=ASUS ROG Gladius II Origin
-DeviceMatch=usb:0b05:1877
-DeviceType=mouse
-Driver=asus
-
-[Driver/asus]
-Profiles=3
-Buttons=8
-Leds=3
-Dpis=2
-DpiRange=100:12000@100
-Quirks=DOUBLE_DPI

data/devices/asus-rog-gladius2.device

@@ -1,13 +0,0 @@
-[Device]
-Name=ASUS ROG Gladius II
-DeviceMatch=usb:0b05:1845
-DeviceType=mouse
-Driver=asus
-
-[Driver/asus]
-Profiles=3
-Buttons=9
-Leds=3
-Dpis=2
-DpiRange=100:12000@100
-ButtonMapping=f0;f1;f2;e4;e5;e6;e7;e8;e9

data/devices/asus-rog-harpe-wireless.device

@@ -1,13 +0,0 @@
-[Device]
-Name=ASUS ROG Harpe Wireless
-DeviceMatch=usb:0b05:1a92
-DeviceType=mouse
-Driver=asus
-
-[Driver/asus]
-Profiles=5
-Buttons=5
-Leds=1
-Dpis=4
-Wireless=1
-DpiRange=100:36000@50

data/devices/asus-rog-keris-wireless-aimpoint.device

@@ -1,13 +0,0 @@
-[Device]
-Name=ASUS ROG Keris Wireless AimPoint
-DeviceMatch=usb:0b05:1a66;usb:0b05:1a68
-DeviceType=mouse
-Driver=asus
-
-[Driver/asus]
-Profiles=5
-Buttons=7
-Leds=1
-Dpis=4
-Wireless=1
-DpiRange=100:36000@50

data/devices/asus-rog-keris-wireless.device

@@ -1,14 +0,0 @@
-[Device]
-Name=ASUS ROG Keris Wireless
-DeviceMatch=usb:0b05:195e;usb:0b05:1960
-DeviceType=mouse
-Driver=asus
-
-[Driver/asus]
-Profiles=3
-Buttons=8
-Leds=2
-Dpis=4
-Wireless=1
-DpiRange=100:16000@100
-Quirks=DOUBLE_DPI

data/devices/asus-rog-keris.device

@@ -1,13 +0,0 @@
-[Device]
-Name=ASUS ROG Keris
-DeviceMatch=usb:0b05:195c
-DeviceType=mouse
-Driver=asus
-
-[Driver/asus]
-Profiles=3
-Buttons=8
-Leds=2
-Dpis=4
-DpiRange=100:16000@100
-Quirks=DOUBLE_DPI

data/devices/asus-rog-omni-receiver.device

@@ -1,12 +0,0 @@
-[Device]
-Name=ASUS ROG Omni Receiver
-DeviceMatch=usb:0b05:1ace
-DeviceType=mouse
-Driver=asus
-
-# The Omni receiver is a shared USB device for multiple mice (all of them
-# enumerate with the same usb id), so the actual model is identified during
-# probe and resolved to the model-specific .device data. This file only
-# exists to get the asus driver probed on the receiver's hidraw nodes.
-[Driver/asus]
-Quirks=OMNI_RECEIVER

data/devices/asus-rog-pugio.device

@@ -1,14 +0,0 @@
-[Device]
-Name=ASUS ROG Pugio
-DeviceMatch=usb:0b05:1846
-DeviceType=mouse
-Driver=asus
-
-[Driver/asus]
-Profiles=3
-Buttons=10
-Leds=3
-Dpis=2
-DpiRange=100:7200@100
-ButtonMapping=f0;f1;f2;e4;e5;e6;0;e8;e9;e1;e2
-LedModes=ON;BREATHING;ON;CYCLE

data/devices/asus-rog-spatha-x.device

@@ -1,14 +0,0 @@
-[Device]
-Name=ASUS ROG Spatha X
-DeviceMatch=usb:0b05:1979;usb:0b05:1977
-DeviceType=mouse
-Driver=asus
-
-[Driver/asus]
-Profiles=5
-Buttons=14
-Leds=3
-Dpis=4
-Wireless=1
-DpiRange=100:19000@50
-ButtonMapping=f0;f1;f2;e4;e5;e6;e8;e9;ea;eb;ec;ed;ee;ef

data/devices/asus-rog-strix-carry.device

@@ -1,14 +0,0 @@
-[Device]
-Name=ASUS ROG Strix Carry
-DeviceMatch=usb:0b05:18b4
-DeviceType=mouse
-Driver=asus
-
-[Driver/asus]
-Profiles=3
-Buttons=8
-Leds=0
-Dpis=2
-Wireless=1
-DpiRange=100:7200@100
-Quirks=STRIX_PROFILE

data/devices/asus-rog-strix-impact.device

@@ -1,12 +0,0 @@
-[Device]
-Name=ASUS ROG Strix Impact
-DeviceMatch=usb:0b05:1847
-DeviceType=mouse
-Driver=asus
-
-[Driver/asus]
-Profiles=1
-Buttons=6
-Leds=1
-Dpis=2
-DpiRange=100:5000@100

data/devices/asus-rog-strix-impact2-wireless.device

@@ -1,13 +0,0 @@
-[Device]
-Name=ASUS ROG Strix Impact II Wireless
-DeviceMatch=usb:0b05:1947;usb:0b05:1949
-DeviceType=mouse
-Driver=asus
-
-[Driver/asus]
-Profiles=3
-Buttons=8
-Leds=3
-Dpis=4
-Wireless=1
-DpiRange=100:16000@100

data/devices/asus-rog-strix-impact2.device

@@ -1,12 +0,0 @@
-[Device]
-Name=ASUS ROG Strix Impact II
-DeviceMatch=usb:0b05:18e1
-DeviceType=mouse
-Driver=asus
-
-[Driver/asus]
-Profiles=3
-Buttons=8
-Leds=3
-Dpis=4
-DpiRange=200:6200@100

data/devices/asus-rog-strix-impact3-wireless.device

@@ -1,19 +0,0 @@
-[Device]
-Name=ASUS ROG Strix Impact III Wireless
-DeviceMatch=usb:0b05:1ad7
-DeviceType=mouse
-Driver=asus
-
-# This device enumerates as usb 0b05:1ad7 behind the ASUS Omni receiver
-# (0b05:1ace). The usb id is resolved during probe: the receiver is
-# identified first (asus-rog-omni-receiver.device) and the serial number
-# signature prefix (OmniSignature) is matched against this file.
-[Driver/asus]
-Profiles=5
-Buttons=8
-Leds=1
-Dpis=4
-Wireless=1
-DpiRange=100:36000@50
-Quirks=OMNI_RECEIVER;SEPARATE_XY_DPI;LED_V2;SETTINGS_V2
-OmniSignature=20

data/devices/asus-rog-strix-impact3.device

@@ -1,13 +0,0 @@
-[Device]
-Name=ASUS ROG Strix Impact III
-DeviceMatch=usb:0b05:1a88
-DeviceType=mouse
-Driver=asus
-
-[Driver/asus]
-Profiles=3
-Buttons=8
-Leds=2
-Dpis=4
-DpiRange=100:12000@50
-Quirks=LED_V2;SETTINGS_V2

data/devices/asus-tuf-gaming-m3-gen-ii.device

@@ -1,12 +0,0 @@
-[Device]
-Name=ASUSTeK TUF GAMING M3 GEN II
-DeviceMatch=usb:0b05:1a9b
-DeviceType=mouse
-Driver=asus
-
-[Driver/asus]
-Profiles=3
-Buttons=8
-Leds=1
-Dpis=4
-DpiRange=100:8000@100

data/devices/asus-tuf-gaming-m4-air.device

@@ -1,12 +0,0 @@
-[Device]
-Name=ASUS TUF GAMING M4 AIR
-DeviceMatch=usb:0b05:1a03
-DeviceType=mouse
-Driver=asus
-
-[Driver/asus]
-Profiles=3
-Buttons=6
-Leds=0
-Dpis=4
-DpiRange=100:16000@100

data/devices/asus-tuf-gaming-mini-wl-miku.device

@@ -1,14 +0,0 @@
-[Device]
-Name=ASUS TUF GAMING MINI WL MOUSE MIKU
-DeviceMatch=usb:0b05:1c56;usb:0b05:1c57
-DeviceType=mouse
-Driver=asus
-
-[Driver/asus]
-Profiles=5
-Buttons=8
-Leds=1
-Dpis=4
-Wireless=1
-DpiRange=100:12000@100
-Quirks=SEPARATE_XY_DPI;RAW_BRIGHTNESS

data/devices/data-parse-test.py

@@ -0,0 +1,227 @@
+#!/usr/bin/env python3
+#
+# Copyright © 2017 Red Hat, Inc.
+#
+# Permission is hereby granted, free of charge, to any person obtaining a
+# copy of this software and associated documentation files (the "Software"),
+# to deal in the Software without restriction, including without limitation
+# the rights to use, copy, modify, merge, publish, distribute, sublicense,
+# and/or sell copies of the Software, and to permit persons to whom the
+# Software is furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice (including the next
+# paragraph) shall be included in all copies or substantial portions of the
+# Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+# THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+# FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+# DEALINGS IN THE SOFTWARE.
+#
+# Device data verification script
+#
+
+import argparse
+import configparser
+import re
+
+
+def assertIn(element, l):
+    if element not in l:
+        raise AssertionError('{} must be in {}'.format(element, l))
+
+
+def assertNotIn(element, l):
+    if element in l:
+        raise AssertionError('{} must not be in {}'.format(element, l))
+
+
+def check_match_str(string):
+    bustypes = ['usb', 'bluetooth']
+
+    matches = string.split(';')
+    for match in matches:
+        if not match:  # empty string if trailing ;
+            continue
+
+        parts = match.split(':')
+        assert(len(parts) == 3)
+        assertIn(parts[0], bustypes)
+        vid = parts[1]
+        assert(vid == '{:04x}'.format(int(vid, 16)))
+        pid = parts[2]
+        assert(pid == '{:04x}'.format(int(pid, 16)))
+
+
+def check_ledtypes_str(string):
+    permitted_types = ['logo', 'side', 'battery', 'dpi', 'switches']
+
+    types = string.split(';')
+    for t in types:
+        if not t:  # emtpy string if trailing ;
+            continue
+
+        assertIn(t, permitted_types)
+
+
+def check_section_device(section):
+    required_keys = ['Name', 'Driver', 'DeviceMatch']
+    permitted_keys = required_keys + ['LedTypes']
+
+    for key in section.keys():
+        assertIn(key, permitted_keys)
+
+    for r in required_keys:
+        assertIn(r, section)
+
+    try:
+        check_ledtypes_str(section['LedTypes'])
+    except KeyError:
+        pass
+
+    check_match_str(section['DeviceMatch'])
+
+
+def check_dpi_range_str(string):
+    import re
+
+    m = re.search('^([0-9]+):([0-9]+)@([0-9.]+)$', string)
+    assert(m is not None)
+    min = int(m.group(1))
+    max = int(m.group(2))
+    steps = float(m.group(3))
+
+    assert(min >= 0 and min <= 400)
+    assert(max >= 2000 and max <= 12000)
+    assert(steps > 0 and steps <= 100)
+
+    if int(steps) == steps:
+        steps = int(steps)
+
+    assert(string == '{}:{}@{}'.format(min, max, steps))
+
+
+def check_dpi_list_str(string):
+    entries = string.split(';')
+    # Remove possible empty last entry if trailing with a ;
+    if not entries[len(entries) - 1]:
+        entries = entries[:-1]
+
+    for idx, entry in enumerate(entries):
+        dpi = int(entry)
+        assert(dpi >= 0 and dpi <= 12000)
+        if idx > 0:
+            prev = entries[idx - 1]
+            prev_dpi = int(prev)
+            assert(dpi > prev_dpi)
+
+
+def check_profile_type_str(string):
+    types = ['G9', 'G500', 'G700']
+    assertIn(string, types)
+
+
+def check_section_hidpp10(section):
+    permitted = ['Profiles', 'ProfileType', 'DpiRange', 'DpiList', 'DeviceIndex', 'Leds']
+    for key in section.keys():
+        assertIn(key, permitted)
+
+    try:
+        nprofiles = int(section['Profiles'])
+        # 10 is arbitrarily chosen
+        assert(nprofiles > 0 and nprofiles < 10)
+    except KeyError:
+        pass
+
+    try:
+        index = int(section['DeviceIndex'], 16)
+        assert(index > 0 and index <= 0xff)
+    except KeyError:
+        pass
+
+    try:
+        check_dpi_range_str(section['DpiRange'])
+        assertNotIn('DpiList', section.keys())
+    except KeyError:
+        pass
+
+    try:
+        check_dpi_list_str(section['DpiList'])
+        assertNotIn('DpiRange', section.keys())
+    except KeyError:
+        pass
+
+    try:
+        check_profile_type_str(section['ProfileType'])
+    except KeyError:
+        pass
+
+    try:
+        leds = int(section['Leds'])
+        # 10 is arbitrarily chosen
+        assert(leds > 0 and leds < 10)
+    except KeyError:
+        pass
+
+
+def check_section_hidpp20(section):
+    permitted = ['DeviceIndex', 'Leds', 'Quirk']
+    for key in section.keys():
+        assertIn(key, permitted)
+
+    try:
+        index = int(section['DeviceIndex'], 16)
+        assert(index > 0 and index <= 0xff)
+    except KeyError:
+        pass
+
+
+def check_section_driver(driver, section):
+    if driver == 'hidpp10':
+        check_section_hidpp10(section)
+    elif driver == 'hidpp20':
+        check_section_hidpp20(section)
+    else:
+        assert('Unsupported driver section {}'.format(driver))
+
+
+def validate_data_file_name(path):
+    # Matching any of the characters in the regular expression will throw an
+    # error. Currently only tests the square brackets [], parentheses, and curly
+    # braces.
+    illegal_characters_regex = '([\[\]\{\}\(\)])'
+    found_characters = re.findall(illegal_characters_regex, path)
+    if found_characters:
+        raise AssertionError("data file name '{}' contains illegal characters: '{}'".format(path, ''.join(found_characters)))
+
+def parse_data_file(path):
+    print('Parsing file {}'.format(path))
+    data = configparser.ConfigParser(strict=True)
+    # Don't convert to lowercase
+    data.optionxform = lambda option: option
+    data.read(path)
+
+    assertIn('Device', data.sections())
+    check_section_device(data['Device'])
+
+    driver = data['Device']['Driver']
+    driver_section = 'Driver/{}'.format(driver)
+
+    permitted_sections = ['Device', driver_section]
+    for s in data.sections():
+        assertIn(s, permitted_sections)
+
+    if data.has_section(driver_section):
+        check_section_driver(driver, data[driver_section])
+
+
+if __name__ == "__main__":
+    parser = argparse.ArgumentParser(description="Device data-file checker")
+    parser.add_argument('file', nargs='+')
+    args = parser.parse_args()
+    for path in args.file:
+        validate_data_file_name(path)
+        parse_data_file(path)

data/devices/device.example

@@ -15,8 +15,10 @@ DeviceMatch=usb:12ab:00f2
 # The libratbag driver backend
 Driver=hidpp10
 
-# The type of this Device: either 'mouse', 'keyboard' or 'other'
+# The types of the LEDs, in the indexed order they appear in, separated by a
-DeviceType=mouse
+# semicolon.
+# Allowed values: logo, side, battery, dpi
+LedTypes=logo;side
 
 # Only one group of driver-specific properties is permitted and it must be
 # [Driver/<drivername>]. It is a bug do have any other [Driver/foo] group in
@@ -50,60 +52,3 @@ Leds=1
 # The HID++ 2.0 device index
 # Should be unset unless required
 # DeviceIndex=1
-
-
-[Driver/asus]
-# Number of profiles
-Profiles=3
-
-# Number of buttons
-Buttons=8
-
-# Number of LEDs
-Leds=3
-
-# Number of DPI presets
-Dpis=2
-
-# Set if device is wireless
-# Wireless=1
-
-# DPI range in format min:max@step
-DpiRange=100:16000@100
-
-# Button mapping
-# ButtonMapping=f0;f1;f2;e4;e5;e6;e8;e9
-
-# Device quirks
-# Quirk=DOUBLE_DPI;STRIX_PROFILE
-
-# Replace `FEED` in the group name with firmware version of the device.
-# To find the right value, see the output of ratbagd and search a message like:
-# "ratbag error: Device with firmware version FEED is not supported"
-# Official software utility configuration file key: `PSD` (converted from
-# ASCII codes).
-[Driver/sinowealth/devices/FEED]
-# Number of buttons.
-# Official software utility configuration file key: `KM` (divided by 2).
-# Default: 0.
-Buttons=6
-
-# Device name.
-DeviceName=CoolVendor CoolMouse
-
-# The order of LED pins on the mouse.
-# Change this to `RBG` if LED colors are weird.
-# Use `None` if there are no LEDs on the mouse.
-# Permitted values: ("RGB", "RBG", "None").
-LedType=RGB
-
-# Number of profiles, called "modes" in official software utilities.
-# If you are unsure what the "mode" thing is about, don't set this field.
-# Official software utility configuration file key: `MDNUM` (divided by 3).
-# Default: 1.
-Profiles=1
-
-# Sensor type.
-# This field is unused, only used for book-keeping purposes.
-# Official software utility configuration file key: `Sensor`.
-SensorType=PMW3289

data/devices/dream-machines-dm5-blink.device

@@ -0,0 +1,10 @@
+[Device]
+Name=Dream Machines DM5 Blink
+DeviceMatch=usb:258a:0027
+Driver=sinowealth
+
+[Driver/sinowealth]
+Buttons=8
+Leds=1
+LedType=RGB
+DpiRange=100:16000@100

data/devices/duplicate-check.py

@@ -24,7 +24,6 @@
 
 import argparse
 import os
-import pathlib
 import sys
 import configparser
 
@@ -35,22 +34,22 @@ def parse_data_file(path):
     data.optionxform = lambda option: option
     data.read(path)
 
-    matches = data["Device"]["DeviceMatch"]
+    matches = data['Device']['DeviceMatch']
-    return matches.split(";")
+    return matches.split(';')
 
 
 if __name__ == "__main__":
-    parser = argparse.ArgumentParser(description="Device duplicate match checker")
+    parser = argparse.ArgumentParser(description='Device duplicate match checker')
-    parser.add_argument("directory")
+    parser.add_argument('file', nargs='+')
     args = parser.parse_args()
     device_matches = {}
     duplicates = False
-    for path in pathlib.Path(args.directory).glob("*.device"):
+    for path in args.file:
         matches = parse_data_file(path)
         fname = os.path.basename(path)
         for m in matches:
             if m in device_matches:
-                print(f"Duplicate DeviceMatch={m} in {fname} and {device_matches[m]}")
+                print('Duplicate DeviceMatch={} in {} and {}'.format(m, fname, device_matches[m]))
                 duplicates = True
             device_matches[m] = fname
 

data/devices/etekcity-scroll-alpha.device

@@ -2,4 +2,3 @@
 Name=Etekcity Scroll Alpha
 DeviceMatch=usb:1ea7:4011
 Driver=etekcity
-DeviceType=mouse

data/devices/glorious-model-d.device

@@ -1,11 +1,9 @@
 [Device]
 Name=Glorious Model D
 DeviceMatch=usb:258a:0033
-DeviceType=mouse
 Driver=sinowealth
 
-[Driver/sinowealth/devices/V102]
+[Driver/sinowealth]
 Buttons=6
-DeviceName=Glorious Model D
+Leds=2
-LedType=RBG
+DpiRange=100:12000@100
-SensorType=PMW3360

data/devices/glorious-model-o-eternal.device

@@ -1,11 +0,0 @@
-[Device]
-Name=Glorious Model O Eternal
-DeviceMatch=usb:3794:a000
-Driver=sinowealth
-DeviceType=mouse
-
-[Driver/sinowealth/devices/1009]
-Buttons=6
-LedType=RBG
-DeviceName=Glorious Model O Eternal
-SensorType=PMW3360

data/devices/glorious-model-o.device

@@ -1,11 +1,10 @@
 [Device]
-Name=Glorious Model O/O-
+Name=Glorious Model O
 DeviceMatch=usb:258a:0036
-DeviceType=mouse
 Driver=sinowealth
 
-[Driver/sinowealth/devices/V103]
+[Driver/sinowealth]
 Buttons=6
-DeviceName=Glorious Model O/O- (updated firmware)
+Leds=2
 LedType=RBG
-SensorType=PMW3360
+DpiRange=100:12000@100

data/devices/gskill-MX-780.device

@@ -3,4 +3,3 @@
 Name=G.Skill MX-780
 DeviceMatch=usb:28da:3101
 Driver=gskill
-DeviceType=mouse

data/devices/logitech-M325.device

@@ -3,4 +3,3 @@
 Name=Logitech M325
 DeviceMatch=usb:046d:400a
 Driver=hidpp20
-DeviceType=mouse

data/devices/logitech-M500s.device

@@ -1,6 +0,0 @@
-# Logitech M500s
-[Device]
-Name=Logitech M500s
-DeviceMatch=usb:046d:c093
-DeviceType=mouse
-Driver=hidpp20

data/devices/logitech-M545.device

@@ -1,6 +0,0 @@
-# Logitech M545
-[Device]
-Name=Logitech M545
-DeviceMatch=usb:046d:4052
-DeviceType=mouse
-Driver=hidpp20

data/devices/logitech-M570.device

@@ -3,4 +3,3 @@
 Name=Logitech M570
 DeviceMatch=usb:046d:1028
 Driver=hidpp10
-DeviceType=mouse

data/devices/logitech-M585-M590.device

@@ -3,4 +3,3 @@
 Name=Logitech M585/M590
 DeviceMatch=usb:046d:406b;bluetooth:046d:b01b
 Driver=hidpp20
-DeviceType=mouse

data/devices/logitech-M705.device

@@ -3,4 +3,3 @@
 Name=Logitech M705
 DeviceMatch=usb:046d:101b
 Driver=hidpp10
-DeviceType=mouse

data/devices/logitech-M720.device

@@ -2,4 +2,3 @@
 Name=Logitech M720
 DeviceMatch=usb:046d:405e;bluetooth:046d:b015
 Driver=hidpp20
-DeviceType=mouse

data/devices/logitech-MX-Anywhere-3.device

@@ -1,6 +0,0 @@
-# Logitech MX Anywhere 3
-[Device]
-Name=Logitech MX Anywhere 3
-DeviceMatch=bluetooth:046d:b025;usb:046d:4090
-DeviceType=mouse
-Driver=hidpp20

data/devices/logitech-MX-Anywhere-3S.device

@@ -1,6 +0,0 @@
-# Logitech MX Anywhere 3S
-[Device]
-Name=Logitech MX Anywhere 3S
-DeviceMatch=bluetooth:046d:b037
-DeviceType=mouse
-Driver=hidpp20

data/devices/logitech-MX-Anywhere2.device

@@ -1,5 +1,4 @@
 [Device]
 Name=Logitech MX Anywhere 2
-DeviceMatch=usb:046d:404a;usb:046d:4072;usb:046d:4063;bluetooth:046d:b013;bluetooth:046d:b018;bluetooth:046d:b01f
+DeviceMatch=usb:046d:404a;bluetooth:046d:b013;bluetooth:046d:b018;bluetooth:046d:b01f
 Driver=hidpp20
-DeviceType=mouse

data/devices/logitech-MX-Anywhere2S.device

@@ -2,4 +2,3 @@
 Name=Logitech MX Anywhere 2S
 DeviceMatch=bluetooth:046d:b01a;usb:046d:406a
 Driver=hidpp20
-DeviceType=mouse

data/devices/logitech-MX-Anywhere3B.device

@@ -1,6 +0,0 @@
-# Logitech MX Anywhere 3B
-[Device]
-Driver=hidpp20
-Name=Logitech MX Anywhere 3B
-DeviceType=mouse
-DeviceMatch=bluetooth:046d:b02d

data/devices/logitech-MX-Ergo.device

@@ -3,4 +3,3 @@
 Name=Logitech MX Ergo
 DeviceMatch=bluetooth:046d:b01d;usb:046d:406f
 Driver=hidpp20
-DeviceType=mouse

data/devices/logitech-MX-Master-2S.device

@@ -3,4 +3,3 @@
 Name=Logitech MX Master 2S
 DeviceMatch=bluetooth:046d:b019;usb:046d:4069
 Driver=hidpp20
-DeviceType=mouse

data/devices/logitech-MX-Master-3.device

@@ -3,4 +3,3 @@
 Name=Logitech MX Master 3
 DeviceMatch=bluetooth:046d:b023;usb:046d:4082
 Driver=hidpp20
-DeviceType=mouse

data/devices/logitech-MX-Master-3S-for-Business.device

@@ -1,5 +0,0 @@
-[Device]
-DeviceMatch=bluetooth:046d:b035
-DeviceType=mouse
-Driver=hidpp20
-Name=Logitech MX Master 3S for Business

data/devices/logitech-MX-Master-3S.device

@@ -1,5 +0,0 @@
-[Device]
-DeviceMatch=bluetooth:046d:b034
-DeviceType=mouse
-Driver=hidpp20
-Name=Logitech MX Master 3S

data/devices/logitech-MX-Master-4.device

@@ -1,5 +0,0 @@
-[Device]
-DeviceMatch=bluetooth:046d:b042
-DeviceType=mouse
-Driver=hidpp20
-Name=Logitech MX Master 4

data/devices/logitech-MX-Master.device

@@ -3,4 +3,3 @@
 Name=Logitech MX Master
 DeviceMatch=usb:046d:4041;bluetooth:046d:b012;usb:046d:4060;bluetooth:046d:b017;bluetooth:046d:b01e;usb:046d:4071
 Driver=hidpp20
-DeviceType=mouse

data/devices/logitech-MX-Vertical.device

@@ -1,5 +1,4 @@
 [Device]
 Name=Logitech MX Vertical
-DeviceMatch=bluetooth:046d:b020;usb:046d:407b;usb:046d:c08a;usb:046d:c077
+DeviceMatch=bluetooth:046d:b020;usb:046d:407b
 Driver=hidpp20
-DeviceType=mouse

data/devices/logitech-MX518.device

@@ -2,4 +2,3 @@
 Name=MX518
 DeviceMatch=usb:046d:c08e
 Driver=hidpp20
-DeviceType=mouse

data/devices/logitech-Marathon-M705.device

@@ -2,4 +2,3 @@
 Name=Logitech Marathon M705
 DeviceMatch=usb:046d:406d
 Driver=hidpp20
-DeviceType=mouse

data/devices/logitech-T650.device

@@ -3,4 +3,3 @@
 Name=Logitech T650
 DeviceMatch=usb:046d:4101
 Driver=hidpp20
-DeviceType=mouse

data/devices/logitech-Wireless-Touchpad.device

@@ -3,4 +3,3 @@
 Name=Logitech Wireless Touchpad
 DeviceMatch=usb:046d:4011
 Driver=hidpp20
-DeviceType=mouse

data/devices/logitech-g-powerplay.device

@@ -1,8 +1,8 @@
 [Device]
 Name=Logitech G Powerplay
 DeviceMatch=usb:046d:405f
+LedTypes=logo
 Driver=hidpp20
-DeviceType=other
 
 [Driver/hidpp20]
 DeviceIndex=7

data/devices/logitech-g-pro-keyboard.device

@@ -1,5 +0,0 @@
-[Device]
-DeviceMatch=usb:046d:c339
-DeviceType=keyboard
-Driver=hidpp20
-Name=Logitech G PRO Keyboard

data/devices/logitech-g-pro-wireless.device

@@ -1,8 +1,8 @@
 [Device]
 Name=Logitech G Pro Wireless
 DeviceMatch=usb:046d:4079;usb:046d:c088
+LedTypes=logo;battery;dpi;
 Driver=hidpp20
-DeviceType=mouse
 
 [Driver/hidpp20]
 DeviceIndex=1

data/devices/logitech-g-pro-x-wireless-superlight.device

@@ -1,5 +0,0 @@
-[Device]
-Name=Logitech G Pro X Wireless Superlight
-DeviceMatch=usb:046d:4093;usb:046d:c094
-DeviceType=mouse
-Driver=hidpp20

data/devices/logitech-g-pro.device

@@ -2,4 +2,4 @@
 Name=Logitech Gaming Mouse G Pro
 DeviceMatch=usb:046d:c085;usb:046d:c08c
 Driver=hidpp20
-DeviceType=mouse
+LedTypes=logo;side

data/devices/logitech-g102-g203.device

@@ -1,6 +1,6 @@
 # G102, G103 and G203 (USB)
 [Device]
 Name=Logitech Gaming Mouse G102/G103/G203
-DeviceMatch=usb:046d:c084;usb:046d:c092;usb:046d:c09d
+DeviceMatch=usb:046d:c084;usb:046d:c092
 Driver=hidpp20
-DeviceType=mouse
+LedTypes=logo;side;

data/devices/logitech-g300.device

@@ -3,4 +3,3 @@
 Name=Logitech G300
 DeviceMatch=usb:046d:c246
 Driver=logitech_g300
-DeviceType=mouse

data/devices/logitech-g302.device

@@ -3,4 +3,4 @@
 Name=Logitech Gaming Mouse G302
 DeviceMatch=usb:046d:c07f
 Driver=hidpp20
-DeviceType=mouse
+LedTypes=logo;side;

data/devices/logitech-g303-shroud.device

@@ -1,5 +0,0 @@
-[Device]
-Name=Logitech G303 Shroud Edition
-DeviceMatch=usb:046d:c097
-DeviceType=mouse
-Driver=hidpp20

data/devices/logitech-g303.device

@@ -3,4 +3,4 @@
 Name=Logitech Gaming Mouse G303
 DeviceMatch=usb:046d:c080
 Driver=hidpp20
-DeviceType=mouse
+LedTypes=logo;side;

data/devices/logitech-g305.device

@@ -2,7 +2,6 @@
 Name=Logitech Gaming Mouse G305
 DeviceMatch=usb:046d:4074
 Driver=hidpp20
-DeviceType=mouse
 
 [Driver/hidpp20]
 Leds=0

data/devices/logitech-g402.device

@@ -2,5 +2,5 @@
 [Device]
 Name=Logitech G402 Gaming Mouse
 DeviceMatch=usb:046d:c07e
+LedTypes=logo
 Driver=hidpp20
-DeviceType=mouse

data/devices/logitech-g403-hero.device

@@ -2,4 +2,3 @@
 Name=Logitech G403 Hero
 DeviceMatch=usb:046d:c08f
 Driver=hidpp20
-DeviceType=mouse

data/devices/logitech-g403-wireless.device

@@ -2,4 +2,3 @@
 Name=Logitech G403 Wireless
 DeviceMatch=usb:046d:405d;usb:046d:c082
 Driver=hidpp20
-DeviceType=mouse

data/devices/logitech-g403.device

@@ -2,4 +2,3 @@
 Name=Logitech G403
 DeviceMatch=usb:046d:c083
 Driver=hidpp20
-DeviceType=mouse

data/devices/logitech-g413.device

@@ -1,5 +0,0 @@
-[Device]
-DeviceMatch=usb:046d:c33a
-DeviceType=keyboard
-Driver=hidpp20
-Name=Logitech G413

data/devices/logitech-g5-2007.device

@@ -3,7 +3,6 @@
 Name=Logitech G5
 DeviceMatch=usb:046d:c049
 Driver=hidpp10
-DeviceType=mouse
 
 [Driver/hidpp10]
 DpiList=400;800;1600;2000

data/devices/logitech-g5.device

@@ -2,7 +2,6 @@
 Name=G5
 DeviceMatch=usb:046d:c041
 Driver=hidpp10
-DeviceType=mouse
 
 [Driver/hidpp10]
 DpiList=400;800;1600;2000

data/devices/logitech-g500.device

@@ -2,7 +2,6 @@
 Name=Logitech G500
 DeviceMatch=usb:046d:c068
 Driver=hidpp10
-DeviceType=mouse
 
 [Driver/hidpp10]
 DpiRange=0:5700@23.53

data/devices/logitech-g500s.device

@@ -2,7 +2,6 @@
 Name=Logitech G500s
 DeviceMatch=usb:046d:c24e
 Driver=hidpp10
-DeviceType=mouse
 
 [Driver/hidpp10]
 DpiRange=0:8200@50

data/devices/logitech-g502-hero-wireless.device

@@ -2,7 +2,3 @@
 Name=Logitech G502 Hero Wireless
 DeviceMatch=usb:046d:407f;usb:046d:c08d
 Driver=hidpp20
-DeviceType=mouse
-
-[Driver/hidpp20]
-Quirk=INDEX_OFFSET

data/devices/logitech-g502-hero.device

@@ -2,7 +2,3 @@
 Name=Logitech G502 Hero
 DeviceMatch=usb:046d:c08b
 Driver=hidpp20
-DeviceType=mouse
-
-[Driver/hidpp20]
-Quirk=INDEX_OFFSET

data/devices/logitech-g502-proteus-core.device

@@ -2,4 +2,3 @@
 Name=Logitech G502 Proteus Core
 DeviceMatch=usb:046d:c07d
 Driver=hidpp20
-DeviceType=mouse

data/devices/logitech-g502-proteus-spectrum.device

@@ -2,7 +2,3 @@
 Name=Logitech G502 Proteus Spectrum
 DeviceMatch=usb:046d:c332
 Driver=hidpp20
-DeviceType=mouse
-
-[Driver/hidpp20]
-Quirk=INDEX_OFFSET

data/devices/logitech-g502-x-plus.device

@@ -1,9 +0,0 @@
-[Device]
-Name=Logitech G502 X PLUS
-DeviceMatch=usb:046d:4099;usb:046d:c095
-DeviceType=mouse
-Driver=hidpp20
-
-[Driver/hidpp20]
-# G502X_PLUS: LED is in the 2nd slot. INDEX_OFFSET: profile index is 1-indexed.
-Quirk=G502X_PLUS;INDEX_OFFSET

data/devices/logitech-g502-x-wireless.device

@@ -1,8 +0,0 @@
-[Device]
-Name=Logitech G502 X Wireless
-DeviceMatch=usb:046d:c098;usb:046d:409f
-DeviceType=mouse
-Driver=hidpp20
-
-[Driver/hidpp20]
-Quirk=INDEX_OFFSET

data/devices/logitech-g502-x.device

@@ -1,8 +0,0 @@
-[Device]
-Name=Logitech G502 X
-DeviceMatch=usb:046d:c099
-DeviceType=mouse
-Driver=hidpp20
-
-[Driver/hidpp20]
-Quirk=INDEX_OFFSET

data/devices/logitech-g513.device

@@ -1,5 +1,5 @@
 [Device]
 Name=Logitech G513
 DeviceMatch=usb:046d:c33c
+LedTypes=switches
 Driver=hidpp20
-DeviceType=keyboard

data/devices/logitech-g600.device

@@ -3,4 +3,3 @@
 Name=Logitech G600
 DeviceMatch=usb:046d:c24a
 Driver=logitech_g600
-DeviceType=mouse

data/devices/logitech-g602.device

@@ -3,7 +3,6 @@
 Name=Logitech G602
 DeviceMatch=usb:046d:402c
 Driver=hidpp20
-DeviceType=mouse
 
 [Driver/hidpp20]
 DeviceIndex=1

data/devices/logitech-g603.device

@@ -3,4 +3,3 @@
 Name=Logitech G603
 DeviceMatch=usb:046d:406c;bluetooth:046d:b01c
 Driver=hidpp20
-DeviceType=mouse

data/devices/logitech-g604.device

@@ -2,7 +2,3 @@
 Name=Logitech G604
 DeviceMatch=usb:046d:4085;bluetooth:046d:b024
 Driver=hidpp20
-DeviceType=mouse
-
-[Driver/hidpp20]
-Quirk=INDEX_OFFSET

data/devices/logitech-g635.device

@@ -1,8 +0,0 @@
-[Device]
-Name=Logitech G635
-DeviceMatch=usb:046d:0a89
-DeviceType=mouse
-Driver=hidpp20
-
-[Driver/hidpp20]
-Buttons=0