DBus API¶

Note: the DBus interface is subject to change

Interfaces:

org.freedesktop.ratbag1.Manager
org.freedesktop.ratbag1.Device
org.freedesktop.ratbag1.Profile
org.freedesktop.ratbag1.Resolution
org.freedesktop.ratbag1.Button
org.freedesktop.ratbag1.Led

Changing settings on a device is a three-step process:

Change the various properties to the desired value
Invoke org.freedesktop.ratbag1.Device.Commit()
Optional: if an error occurred writing the new data to the device, a org.freedesktop.ratbag1.Resync signal is emitted on the device and all properties are updated accordingly.

The time it takes to write settings to a device varies greatly, any caller must be prepared to receive a org.freedesktop.ratbag1.Device.Resync signal several seconds after org.freedesktop.ratbag1.Device.Commit().

Notes on the DBus API¶

For easier debugging, objects paths are constructed from the device. e.g. /org/freedesktop/ratbag/button/event5/p0/b10 is the button interface for button 10 on profile 0 on event5. The naming is subject to change. Do not rely on a constructed object path in your application.

Types¶

Types used by these interfaces:

Type	Description
`b`	Bool
`o`	Object path
`s`	String
`u`	Unsigned 32-bit integer
`(uuu)`	A triplet of 32-bit integers
`ao`	Array of object paths
`as`	Array of strings
`au`	Array of 32-bit integers
`a(uu)`	Array of 2 32-bit integer tuples

For details on each type, see the DBus Specification.

Flags¶

Properties marked as constant do not change for the lifetime of the object. Properties marked as mutable may change, and a org.freedesktop.DBus.Properties.PropertyChanged signal is sent for those unless otherwise specified.

org.freedesktop.ratbag1.Manager¶

The org.freedesktop.ratbag1.Manager interface is the entry point to interact with ratbagd.

APIVersion¶

Type:	i
Flags:	read-only,constant

The DBus API version. This is a stopgap feature while the DBus API is still in flux. The version has no backwards or forward-compatibility guarantees - your client must understand exactly the same version, it is not enough to support an older or a newer version.

This API will be removed once the DBus API is declared stable.

Devices¶

Type:	ao
Flags:	read-only, mutable

An array of read-only object paths referencing the available devices. The devices implement the org.freedesktop.ratbag1.Device interface.

org.freedesktop.ratbag1.Device¶

The org.freedesktop.ratbag1.Device interface describes a single device known to ratbagd.

Model¶

Type:	s
Flags:	read-only, constant

An ID identifying the physical device model. This string is guaranteed to be unique for a specific model and always identical for devices of that model.

This is a string of one of the following formats:

usb:1234:abcd:0
bluetooth:5678:ef01:0
unknown

In the future, other formats may get added. Clients must ignore unknown string formats.

For a string starting with usb:, the format is the bus type (USB) followed by a 4-digit lowercase hex USB vendor ID, followed by a 4-digit lowercase hex USB product ID, followed by an decimal version number of unspecified length. These four elements are separated by a colon (:).

For a string starting with bluetooth:, the format is the bus type (Bluetooth) followed by a 4-digit lowercase hex Bluetooth vendor ID, followed by a 4-digit lowercase hex Bluetooth product ID, followed by an decimal version number of unspecified length. These four elements are separated by a colon (:).

For the string unknown, the model of the device cannot be determined. This is usually a bug in libratbag.

For a Model of type usb and bluetooth, the version number is reserved for use by libratbag. Device with identical vendor and product IDs but different versions must be considered different devices. For example, the version may increase when a manufacturer re-uses USB Ids.

Vendor or product IDs of 0 are valid IDs (e.g. used used by test devices).

Name¶

Type:	s
Flags:	read-only, constant

The device’s name, suitable for presentation to the user.

FirmwareVersion¶

Type:	s
Flags:	read-only, constant

A device-specific string with the firmware version, or the empty string. For devices with a major/minor or purely numeric firmware version, the conversion into a string is implementation-defined.

Profiles¶

Type:	ao
Flags:	read-only, mutable

This property is mutable if the device supports adding and removing profiles.

Provides the list of profile paths for all profiles on this device, see org.freedesktop.ratbag1.Profile

Commit() → ()¶: Commits the changes to the device. This call always succeeds, the data is written to the device asynchronously. Where an error occurs, the Resync() signal is emitted and all properties are updated to the current state.

Resync()¶

Type:	Signal

Emitted when an internal error occurs, usually on writing values to the device after Commit(). Upon receiving this signal, clients are expected to resync their property values with ratbagd.

org.freedesktop.ratbag1.Profile¶

Index¶

Type:	u
Flags:	read-only, constant

The zero-based index of this profile

Name

Type:	s
Flags:	read-write, mutable

The name of this profile. If the name is the empty string, the profile name cannot be changed.

Disabled¶

Type:	b
Flags:	read-write, mutable

True if this is the profile is disabled, false otherwise.

Note that a disabled profile might not have correct bindings, so it’s a good thing to rebind everything before calling Commit().

IsActive¶

Type:	b
Flags:	read-only, mutable

True if this is the currently active profile, false otherwise.

Profiles can only be set to active, but never to not active - at least one profile must be active at all times. This property is read-only, use the SetActive() method to activate a profile.

IsDirty¶

Type:	b
Flags:	read-only, mutable

True if this profile is dirty, false otherwise.

Dirty, that is, the device needs committing after being configured. This property becomes true whenever any other property of the profile is updated.

Resolutions¶

Type:	ao
Flags:	read-only, mutable

This property is mutable if the device supports adding and removing resolutions.

Provides the object paths of all resolutions in this profile, see org.freedesktop.ratbag1.Resolution.

Buttons¶

Type:	ao
Flags:	read-only, constant

Provides the object paths of all buttons in this profile, see org.freedesktop.ratbag1.Button.

Leds¶

Type:	ao
Flags:	read-only, constant

Provides the object paths of all LEDs in this profile, see org.freedesktop.ratbag1.Led.

AngleSnapping¶

Type:	i
Flags:	read-write, mutable

Sensor angle snapping boolean value as an int (1 or 0), or -1 to indicate that the device doesn’t support reading and/or writing this value.

Debounce¶

Type:	i
Flags:	read-write, mutable

Int for the button debounce time in milliseconds assigned to this profile. This time must be one of those listed in Debounces, or -1 to indicate that changing debounce time for this device is not allowed.

Debounces¶

Type:	au
Flags:	read-write, constant

A list of permitted button debounce times. Values in this list may be used in the Debounce property. This list is always sorted ascending, the lowest debounce time is the first item in the list.

This list may be empty if the device does not support reading and/or writing the debounce time.

ReportRate¶

Type:	u
Flags:	read-write, mutable

uint for the report rate in Hz assigned to this profile. This rate must be one of those listed in ReportRates.

ReportRates¶

Type:	au
Flags:	read-write, constant

A list of permitted report rates. Values in this list may be used in the ReportRate property. This list is always sorted ascending, the lowest report rate is the first item in the list.

This list may be empty if the device does not support reading and/or writing the report rate.

SetActive() → ()¶: Set this profile to be the active profile

org.freedesktop.ratbag1.Resolution¶

Index

Type:	u
Flags:	read-only, constant

Index of the resolution

Capabilities¶

Type:	au
Flags:	read-only, constant

Bit-mask of capabilities.

Value	Definition
1	Resolution can be set for x and y axes separately.
2	Resolution can be disabled and enabled. Note that this capability only notes the general capability. A specific resolution may still fail to be disabled, e.g. when it is the active resolution on the device.

(Source: ratbag_resolution_capability in libratbag.h).

In the future, extra values may get added. Clients must ignore unknown Capabilities.

IsActive

Type:	b
Flags:	read-only, mutable

True if this is the currently active resolution, false otherwise.

Resolutions can only be set to active, but never to not active - at least one resolution must be active at all times. This property is read-only, use the SetActive() method to set a resolution as the active resolution.

IsDefault¶

Type:	b
Flags:	read-only, mutable

True if this is the currently default resolution, false otherwise. If the device does not have the default resolution capability, this property is always false.

Resolutions can only be set to default, but never to not default - at least one resolution must be default at all times. This property is read-only, use the SetDefault() method to set a resolution as the default resolution.

IsDisabled¶

Type:	b
Flags:	read-write, mutable

True if this resolution is disabled, false otherwise. If the device does not have the disabled resolution capability, this property is always false.

Resolution¶

Type:	v
Flags:	read-write, mutable

The resolution for this entry in dpi.

If the variant is a single unsigned integer (u), the value is the resolution for both the x- and the y- axis.

If the variant is a unsigned integer tuple ((uu)), the value is the resolution for the x- and y- axis separately.

A client must leave the type intact, assigning a single u to a resolution object previously exporting (uu) is invalid.

The value for the resolution must be equal to one of the values in Resolutions.

Resolutions

Type:	au
Flags:	read-only, constant

A list of permitted resolutions. Values in this list may be used in the Resolution property. This list is always sorted ascending, the lowest resolution is the first item in the list.

This list may be empty if the device does not support reading and/or writing to resolutions.

SetActive() → (): Set this resolution to be the active one

SetDefault() → ()¶: Set this resolution to be the default

org.freedesktop.ratbag1.Button¶

Index

Type:	u
Flags:	read-only, constant

Index of the button

Mapping¶

Type:	(uv)
Flags:	read-write, mutable

The current button mapping. The first element is the ActionType for this button and must be one of those in ActionTypes.

If the ActionType is Button, the variant is an unsigned integer (u) denoting the button number to map to.

If the ActionType is Special, the variant is an unsigned integer (u) denoting the special value to map to.

If the ActionType is Macro, the variant is an array of integer tuples (a(uu)) where each tuple is (type, keycode) and the type is one of the following:

Value	Description
0	Key release event
1	Key press event

If the ActionType is None, the variant is an unsigned integer (u) of value 0.

If the ActionType is Unknown, the variant is an unsigned integer (u) of value 0.

ActionTypes¶

Type:	au
Flags:	read-only, constant

Value	Name	Description
0	None	No mapping configured
1	Button	Mapping to a logical button number
2	Special	Mapping to a special function
3	Key	Mapping to a simple key action
4	Macro	Mapping to a macro key sequence
1000	Unknown	An unknown or unreadable mapping type

See Special button functions for a list of supported special functions.

Clients must ignore ActionTypes unknown to them.

org.freedesktop.ratbag1.Led¶

Index

Type:	u
Flags:	read-only, constant

Index of the LED

Mode¶

Type:	u
Flags:	read-write, mutable

Enum describing the current mode, see Modes.

Modes¶

Type:	au
Flags:	read-only, constant

A list of modes supported by this LED.

Value	Definition
0	LED is off
1	LED is on with constant brightness
2	LED cycles through a set of colors. This mode ignores the `Color` values.
3	LED uses a breathing-style animation

In the future, extra values may get added. Clients must ignore unknown Modes.

Color¶

Type:	(uuu)
Flags:	read-write, mutable

32-bit unsigned int triplet (RGB) of the LED’s color. Only the least significant bits are valid, the ColorDepth property defines the number of bits for each color. When writing to this property, all bits outside the color depth must be 0.

ColorDepth¶

Type:	u
Flags:	read-only, constant

An enum specifying the color depth of this LED. Permitted values are:

Value	Definition
0	0 bits per color (monochrome)
1	8 bits per color
2	1 bit per color

In the future, extra values may get added. Clients must ignore unknown ColorDepths and not manipulate the LED color where the ColorDepth is unknown.

EffectDuration¶

Type:	u
Flags:	read-write, mutable

The effect duration in ms, possible values are in the range 0 - 10000

Brightness¶

Type:	u
Flags:	read-write, mutable

The brightness of the LED, normalized to the range 0-255, inclusive. Where the LED supports less than 8-bit of brightness, libratbag maps the value to a device-supported value in an implementation-defined manner.

Special button functions¶

All special button function values are based on the value 0x40000000 (1 << 30).

Offset Value Description

0 0x40000000 Unknown

1 0x40000001 Doublelick

2 0x40000002 Wheel left

3 0x40000003 Wheel right

4 0x40000004 Wheel up

5 0x40000005 Wheel down

6 0x40000006 Ratchet mode switch

7 0x40000007 Resolution cycle up

8 0x40000008 Resolution cycle down

9 0x40000009 Resolution up

10 0x4000000a Resolution down

11 0x4000000b Resolution alternate

12 0x4000000c Resolution default

13 0x4000000d Profile cycle up

14 0x4000000e Profile cycle down

15 0x4000000f Profile up

16 0x40000010 Profile down

17 0x40000011 Second mode

18 0x40000012 Battery level