Currently only the hooks for x/y resolution, the rest is unimplemented. Also
the etekcity driver needs an update here.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
And the same for set_active_profile -> set_active. This API is more reliable,
the previous incarnation required the client to compare pointer values.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
It felt weird reading:
Profile 2
Resolutions:
3: 1000dpi @ 500Hz (active)
3: 1600dpi @ 500Hz
3: 2400dpi @ 500Hz
3: 3200dpi @ 500Hz
3: 4000dpi @ 500Hz
3: 8000dpi @ 500Hz
We could index the profiles to 1 too, but that would introduce slightly
more code change.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
The devices we're dealing with all have multiple DPIs to configure. This API
will replace the current ratbag_profile_set_resolution_dpi() and friends.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The buttons are given as plain numbers, not sure if we should
use BTN_LEFT, BTN_RIGHT, etc instead.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
This adds two button types: pinkie and pinkie2 when there are buttons
on the right side of the mouse.
OK, I could have called them left-handed-thumb.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
One giant commit, but I didn't know how to split this up easier. The problem
is a misunderstanding in what the button type is and the code that built on
that misunderstanding, requiring a lot of interdependent parts to be updated
at once.
The button _type_ is the physical description of the button.
The button _action type_ is what will happen when you hit the buttons.
The type is read-only, since we're not dealing with mr potato head here.
The action is adjustible and we now support buttons, keys and special
in-hardware actions (e.g. dpi changes). A few FIXMEs still in place, e.g. we
don't handle modifiers with keys.
For buttons we just take numerical button numbers. i.e. we can map a button to
button 4, which will result in BTN_SIDE, and eventually logical button 8 in X.
For keys we take KEY_FOO, since eventually we want this to come out as that
(could do this for button as well I guess). Modifiers are currently ignored.
For special actions we have a enum of actions we support.
The button type enum is thus reduced a lot, and everything needs to be
switched.
This breaks ratbag-command change-button, will be fixed later since it's
misdesigned as it is anyway.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The OS X tool for Logitech's gaming mouse did not allow button-profiles on the
G500s, but DPI modes could be configured. This is an issue with the software,
not the device itself since the device supports muliple profiles. So the
original assumption that there are devices that have profiles for DPIs but not
buttons is likely wrong, the devices we looked at so far all have profiles
with a set of DPI modes in it, one of which is currently active.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
and relocate the raw value 0 of RATBAG_BUTTON_TYPE_NONE to be below 0x06.
The windows application sets 0x06 when disabling a button.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Problem: when a button is diverted, it stops sending its original button,
which is good, but then reports only on the HID++ long report collection.
That is a little bit embarrassing.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Etekcity mice have volume up/down mapped on the 2 buttons on the right
side of the mouse. They get easily pressed by the hand and can annoy the
user. This command switches on and off these buttons.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
This allows to test ratbag_device_set_active_profile() and the
.write_profile() callback from the drivers.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
When accessing the buttons of a profile, we should not unref it until
we are done (or there will be some illegal access to a free-ed pointer).
The last profile_unref should be called against the active_profile, not
the last profile.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Naming scheme is now:
* ratbag - the context
* ratbag_device - the device
* ratbag_profile
* ratbag_button
...
Only leftovers of "libratbag" are the header file name, #defines that are
exported through that header file and anything that has to do with the actual
library iself (e.g. the symbol export file).
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Looks like a command name before the current ratbag-command one, and since
this is a static method anyway just usage() will do.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Put the code in place for a multi-command tool, first command is
ratbag-command info /path/to/device
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Same as libinput. Since we need to open device files we need something that's
authorized to open them. So we punt that to the caller.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
We don't need the evdev fd, it's more flexible to start with a udev device.
This changes ratbag-command to take a /sys path as well, but for not it'll
do.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
