We do not need to parse all the devices, but only the one given in the
command line. Make ratbagc.py handle this case properly.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
To be able to query which modes are available.
Exposed via ratbagctl as
./build/ratbagctl.devel led 0 capabilities event4
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Previously, we could get a min/max value but there was no guarantee that it
any value in between would actually work on the device. Some devices have a
discrete number of resolutions (e.g. 500, 1000, 2000, 2500), most others have
at least a minimum step size (so 1234 isn't a valid dpi value).
Change the min/max to a discrete list of which resolutions are supported. This
allows a UI to adjust its interface dynamically - e.g. a combobox if there are
only 3 resolutions or a slider if there are a million of them.
This is a DBus API break
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
A driver is supposed to know what type an LED is, unknown doesn't help anyone
here. So replace this with a private #define and abort when a driver doesn't
set the type. This also adds a requirement that any driver initializing a LED
must have the read_led() function, otherwise we can't fill it in correctly.
And bump the enum up by one, the first valid value should start at 1 (or some
other non-boolean value).
Related #365Fixes#364
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
1-bit RGB is needed for the Logitech G300, let's rename the main RGB to
indicate how many bits we actually have.
See #335
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The initial value of 400 in the enum is chosen so it looks weird when someone
tries to interpret the value as integer. Values of 1, 2, 4, etc. could be
confused with something realistic.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Plan is to remove the key mapping altogether and make it transparent from the
Macro mappings (in libratbag/the drivers). Meanwhile, remove the DBus API so
nothing can actually start using it.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Some devices can have a custom name, so let's export that capability.
In ratbagd, libratbag/ratbag_profile_set_name() returns an error, we
put it under silence, the client has to check for the capabilities
before asking ratbagd to change the profile name.
Fixes: #266
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
few minor issues which were unseen because driver-test was missing to set
the special key mappings
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Assigning an action on a button has some side effects, and this is why we
do not have writable properties on those.
Mark the _set_dbus_property() as read only so we do not get a bunch of
PropertyReadOnly exceptions.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Now that we've moved all properties to read-write where required, unleash the
exception again - any UnknownProperty error is now a bug.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This also drops the separate x/y properties and instead just returns a tuple
for "Resolution".
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This is superfluous, it's trivial enough to get the Resolutions property and then
work with that. We're not talking about a huge amount of data anyway.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This is superfluous, it's trivial enough to get the Profiles property and then
work with that. We're not talking about a huge amount of data anyway.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Instead of a GetActiveProfile in the device, make this a property of the
profile. The SetActive method stays around, it's less prone to mis-use than
the property since we cannot allow a caller to go "profile.is_active = False"
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Our device list is so small that having separate signals is a bit pointless,
updating the property should be sufficient.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
set_cached_property merely updates the proxy's own copy, it doesn't do
anything to the remote. Manually call the DBus.Properties.Set interface
to do that.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
When running in a container (CircleCI), dbus may not be available. Throw one
of our errors to be consistent with our behavior when the name owner isn't
available.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
We are using a custom python script to generate the final ratbagctl
so we can strip out the headers.
Now merging and testing ratbagd.py in piper will be easier than ever.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
