Long-term we should have probe() and read_profile(), the latter of which
should read each profile and fill in _all_ information.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
And the same for set_active_profile -> set_active. This API is more reliable,
the previous incarnation required the client to compare pointer values.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
When we read the profiles, we need to know the capabilities of the device.
If the device has not been enumerated, then we are screwed.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
given that we create all the buttons and profiles during probe(), there
is no need to re-probe for it every time we access it.
Right now, this works because only ratbag-command uses the library and
is a one shot program.
In the future, we should also read the events to detect changes in the
configuration if the user can use physical buttons to change the profile,
dpi or something else.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Still not hooked up in the library, but re-assigning back a different
hard-coded macro works.
This also re-introduce the dependency on libevdev for the lib.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
the current driver API is not good enough. We should be able to say
which DPI setting we want to change. Thus, the external API is not
correct either.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
We need to store the profile in each ratbag_resolution or we will not be
able to get back to the driver.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
The devices we're dealing with all have multiple DPIs to configure. This API
will replace the current ratbag_profile_set_resolution_dpi() and friends.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The kernel overwrites the device ID with the correct one for our device, so we
can just use 0x00 for all devices and skip the search for the unifying
receiver hidraw device.
Since we're not talking to the receiver anymore, we can/have to drop the
pairing information queries and the related info. Since we weren't using this
anyway it's not a big loss.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The mouse supports profiles and we can read them already, it's the mac
software that appears crippled here. And each profile has up to 5 dpi modes.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
ratbag_profile_init_buttons() already loops over the given number of
buttons.
Remove the extra for loop and save some CPU (and possibly USB depending on
the driver) cycles.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
the logical and physical bits were inverted:
- logical is the action of the button
- physical corresponds to the actual button on the mouse (so the 'type')
- there is a duplicate from driver-etekcity to match 2 actions, this should
be factorized in a helper somewhere in a later commit
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
If action is NULL, that's a problem.
If etekcity_button_action_to_raw() returns 0, we should not try to write
0x00 in the profile. The proper command for "none" is 0x06. 0x00 is thus
an error.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
This sets a button to RATBAG_BUTTON_ACTION_TYPE_NONE when we want
to disable a button completely.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
The buttons are given as plain numbers, not sure if we should
use BTN_LEFT, BTN_RIGHT, etc instead.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Now that the profiles and buttons have to be created once by the probe()
function, we need to clean them up when the device is unref-ed.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
This adds two button types: pinkie and pinkie2 when there are buttons
on the right side of the mouse.
OK, I could have called them left-handed-thumb.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
this index is the position of the button in the report, so it's misleading
to keep it as "index". The actual index is the button->index.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Found on the Logitech MX Master. Most of other Logitech device with
physical ratchet disable capability do not show this button to the host
however.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
One giant commit, but I didn't know how to split this up easier. The problem
is a misunderstanding in what the button type is and the code that built on
that misunderstanding, requiring a lot of interdependent parts to be updated
at once.
The button _type_ is the physical description of the button.
The button _action type_ is what will happen when you hit the buttons.
The type is read-only, since we're not dealing with mr potato head here.
The action is adjustible and we now support buttons, keys and special
in-hardware actions (e.g. dpi changes). A few FIXMEs still in place, e.g. we
don't handle modifiers with keys.
For buttons we just take numerical button numbers. i.e. we can map a button to
button 4, which will result in BTN_SIDE, and eventually logical button 8 in X.
For keys we take KEY_FOO, since eventually we want this to come out as that
(could do this for button as well I guess). Modifiers are currently ignored.
For special actions we have a enum of actions we support.
The button type enum is thus reduced a lot, and everything needs to be
switched.
This breaks ratbag-command change-button, will be fixed later since it's
misdesigned as it is anyway.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The drivers are responsible for initializing the buttons during probe(), then
we just return the one we found
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Make the driver responsible for creating them on startup, then just return the
one we already have.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This is something better handled by mapping the various button types into a
specific string on the client-side.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
