drath/libratbag
1
0
Fork 1
mirror of https://github.com/libratbag/libratbag.git synced 2026-11-07 23:23:52 +01:00
Code Issues Projects Releases Wiki Activity
Files
a9545b2b63d2e81e0f97c3fefe69742c9988adc8
libratbag/src/driver-sinowealth.c
Yaroslav Chvanov 382df65a5d sinowealth: implement debounce time reading/writing
2023-03-02 03:01:06 +03:00

1974 lines
62 KiB
C
Raw Blame History

/*
* Copyright © 2020 Marian Beermann
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
* DEALINGS IN THE SOFTWARE.
*/
#include "driver-sinowealth.h"
#include "libratbag-data.h"
#include "libratbag-private.h"
#include "libratbag-hidraw.h"
#include "shared-macro.h"
enum sinowealth_report_id {
SINOWEALTH_REPORT_ID_CONFIG = 0x4,
SINOWEALTH_REPORT_ID_CMD = 0x5,
SINOWEALTH_REPORT_ID_CONFIG_LONG = 0x6,
} __attribute__((packed));
_Static_assert(sizeof(enum sinowealth_report_id) == sizeof(uint8_t), "Invalid size");
enum sinowealth_command_id {
SINOWEALTH_CMD_FIRMWARE_VERSION = 0x1,
SINOWEALTH_CMD_PROFILE = 0x2,
SINOWEALTH_CMD_GET_CONFIG = 0x11,
SINOWEALTH_CMD_GET_BUTTONS = 0x12,
/* Doesn't work on devices with shorter configuration data (123 instead of 137). */
SINOWEALTH_CMD_DEBOUNCE = 0x1a,
/* Only works on devices that use CONFIG_LONG report ID. */
SINOWEALTH_CMD_LONG_ANGLESNAPPING_AND_LOD = 0x1b,
/* Same as GET_CONFIG but for the second profile. */
SINOWEALTH_CMD_GET_CONFIG2 = 0x21,
/* Same as GET_BUTTONS but for the second profile. */
SINOWEALTH_CMD_GET_BUTTONS2 = 0x22,
SINOWEALTH_CMD_MACRO = 0x30,
/* Puts the device into DFU mode.
* To reset re-plug the mouse or do a clean reboot.
*/
SINOWEALTH_CMD_DFU = 0x75,
} __attribute__((packed));
_Static_assert(sizeof(enum sinowealth_command_id) == sizeof(uint8_t), "Invalid size");
#define SINOWEALTH_BUTTON_SIZE 88
#define SINOWEALTH_CMD_SIZE 6
/* Report length commands that get configuration data should use. */
#define SINOWEALTH_CONFIG_REPORT_SIZE 520
#define SINOWEALTH_CONFIG_SIZE_MAX 167
#define SINOWEALTH_CONFIG_SIZE_MIN 123
#define SINOWEALTH_MACRO_SIZE 515
/* The PC software only goes down to 400, but the PMW3360 doesn't care */
#define SINOWEALTH_DPI_MIN 100
#define SINOWEALTH_DPI_STEP 100
/* Arbitrary, but I think every sensor supports this DPI, and this is
* about as high as most people would ever like to go anyway.
*/
#define SINOWEALTH_DPI_FALLBACK 2000
/* Technically it can be set to 2 ms, but Glorious Model O Software
* v1.0.9 does not allow doing so, and so don't we.
*/
#define SINOWEALTH_DEBOUNCE_MIN 4
#define SINOWEALTH_DEBOUNCE_MAX 16
/* Different software expose different amount of DPI slots:
* Glorious - 6;
* G-Wolves - 7.
* But in fact fact there are eight slots.
*/
#define SINOWEALTH_NUM_DPIS 8
/* Technically SinoWealth mice support second profile, but there isn't
* a single configuration software that exposes it.
* It's suggested that some may even support 3 profiles, but at least
* V103 only supports 2.
*
* We could enable this, but by default other profiles have no button
* mappings, so the user will have their mouse soft-locked if they don't
* have another mouse to set some mappings with.
*
* To fix this we could populate empty profiles with some default
* mappings.
*
* There may also be some other problem we are not aware of, after all,
* why would SinoWealth even hide this feature.
*/
#define SINOWEALTH_NUM_PROFILES 1
_Static_assert(SINOWEALTH_NUM_PROFILES <= 2, "Too many profiles enabled");
/* Maximum amount of real events in a macro. */
#define SINOWEALTH_MACRO_LENGTH_MAX 168
#define SINOWEALTH_FW_VERSION_LEN 4
static const unsigned int SINOWEALTH_DEBOUNCE_TIMES[] = {
4, 6, 8, 10, 12, 14, 16
};
/* Bit mask for @ref sinowealth_config_report.config.
*
* This naming may be incorrect as it's not actually known what the other bits do.
*/
enum sinowealth_config_data_mask {
SINOWEALTH_XY_INDEPENDENT = 0b1000,
};
/* Color data the way mouse stores it.
*
* @ref sinowealth_raw_to_color.
*
* @ref sinowealth_color_to_raw.
*
* @ref sinowealth_led_format.
*/
struct sinowealth_color {
/* May be in either RGB or RBG format depending on the device.
* See the comment above this struct.
*/
uint8_t data[3];
} __attribute__((packed));
_Static_assert(sizeof(struct sinowealth_color) == 3, "Invalid size");
/* Sensor IDs used in SinoWealth firmware and software. */
enum sinowealth_sensor {
SINOWEALTH_SENSOR_PMW3360 = 0x06,
SINOWEALTH_SENSOR_PMW3327 = 0x0e,
SINOWEALTH_SENSOR_PMW3389 = 0x0f,
} __attribute__((packed));
_Static_assert(sizeof(enum sinowealth_sensor) == sizeof(uint8_t), "Invalid sensor enum size");
enum sinowealth_rgb_effect {
RGB_OFF = 0,
RGB_GLORIOUS = 0x1, /* unicorn mode */
RGB_SINGLE = 0x2, /* single constant color */
RGB_BREATHING7 = 0x3, /* breathing with seven user-defined colors */
RGB_TAIL = 0x4,
RGB_BREATHING = 0x5, /* Full RGB breathing. */
RGB_CONSTANT = 0x6, /* Each LED gets its own static color. Not available in Glorious software. */
RGB_RAVE = 0x7,
RGB_RANDOM = 0x8, /* Randomly change colors. Not available in Glorious software. */
RGB_WAVE = 0x9,
/* Single color breathing.
* Not available on some mice, for example Genesis Xenon 770 and
* DreamMachines DM5 (both are 0027 mice). On them RGB_BREATHING7
* with one color should be used instead.
*/
RGB_BREATHING1 = 0xa,
/* The value mice with no LEDs have.
* Unreliable as non-constant.
* Do **not** overwrite it.
*/
RGB_NOT_SUPPORTED = 0xff,
} __attribute__((packed));
_Static_assert(sizeof(enum sinowealth_rgb_effect) == sizeof(uint8_t), "Invalid size");
struct sinowealth_rgb_mode {
/* 0x1/2/3.
* @ref sinowealth_duration_to_rgb_mode.
* @ref sinowealth_rgb_mode_to_duration.
*/
uint8_t speed:4;
/* 0x1/2/3/4.
* @ref sinowealth_brightness_to_rgb_mode.
* @ref sinowealth_rgb_mode_to_brightness.
*/
uint8_t brightness:4;
};
_Static_assert(sizeof(struct sinowealth_rgb_mode) == sizeof(uint8_t), "Invalid size");
struct sinowealth_xy_independent_dpi {
uint8_t x;
uint8_t y;
};
_Static_assert(sizeof(struct sinowealth_xy_independent_dpi) == sizeof(uint8_t[2]), "Invalid size");
/* DPI/CPI is encoded in the way the PMW3360 and PWM3327 sensors
* accept it:
* value = (DPI - 100) / 100;
* or the way the PMW3389 sensor accepts it:
* value = DPI / 100;
*
* @ref sinowealth_raw_to_dpi
* @ref sinowealth_dpi_to_raw
*/
union sinowealth_dpis {
/* You MUST use this field if no resolutions have separate X and Y.
*/
uint8_t dpis[8];
/* You MUST use this field if at least one resolution has separate
* X and Y.
*/
struct sinowealth_xy_independent_dpi independent[8];
};
_Static_assert(sizeof(union sinowealth_dpis) == sizeof(uint8_t[16]), "Invalid size");
/* Configuration data the way it's stored in mouse memory.
* When we want to change a setting, we basically copy the entire mouse
* configuration, modify it and send it back.
*/
struct sinowealth_config_report {
enum sinowealth_report_id report_id;
enum sinowealth_command_id command_id;
uint8_t unknown1;
/* 0x0 - read.
* CONFIG_SIZE-8 - write.
*/
uint8_t config_write;
uint8_t unknown2[2];
enum sinowealth_sensor sensor_type;
uint8_t unknown6[3];
/* @ref sinowealth_report_rate_map. */
uint8_t report_rate:4;
/* 0b1000 - make DPI axes independent. */
uint8_t config_flags:4;
uint8_t dpi_count:4;
/* Starting from 1 counting only active slots. */
uint8_t active_dpi:4;
/* bit set: disabled, unset: enabled */
uint8_t disabled_dpi_slots;
union sinowealth_dpis dpis;
struct sinowealth_color dpi_color[8];
enum sinowealth_rgb_effect rgb_effect;
struct sinowealth_rgb_mode glorious_mode;
uint8_t glorious_direction;
struct sinowealth_rgb_mode single_mode;
struct sinowealth_color single_color;
struct sinowealth_rgb_mode breathing7_mode;
uint8_t breathing7_colorcount;
struct sinowealth_color breathing7_colors[7];
struct sinowealth_rgb_mode tail_mode;
struct sinowealth_rgb_mode breathing_mode;
struct sinowealth_rgb_mode constant_color_mode;
struct sinowealth_color constant_color_colors[6];
uint8_t unknown3[12];
struct sinowealth_rgb_mode rave_mode;
struct sinowealth_color rave_colors[2];
/* From here onward goes the data not available in short mice.
* .. judging by the size of this struct. The data in them may
* actually be different, we didn't test this yet.
*/
struct sinowealth_rgb_mode random_mode;
struct sinowealth_rgb_mode wave_mode;
struct sinowealth_rgb_mode breathing1_mode;
struct sinowealth_color breathing1_color;
/* 0x1 - 2 mm.
* 0x2 - 3 mm.
* 0xff - indicates that lift off distance is changed with a dedicated command. Not constant, so do **NOT** overwrite it.
*/
uint8_t lift_off_distance;
uint8_t unknown4;
/* From here onward goes the data only available in long mice. */
uint8_t unknown5[36];
uint8_t padding[SINOWEALTH_CONFIG_REPORT_SIZE - SINOWEALTH_CONFIG_SIZE_MAX];
} __attribute__((packed));
_Static_assert(sizeof(struct sinowealth_config_report) == SINOWEALTH_CONFIG_REPORT_SIZE, "Invalid size");
enum sinowealth_button_type {
SINOWEALTH_BUTTON_TYPE_NONE = 0, /* This value might appear on broken configurations. */
SINOWEALTH_BUTTON_TYPE_BUTTON = 0x11,
SINOWEALTH_BUTTON_TYPE_WHEEL = 0x12,
SINOWEALTH_BUTTON_TYPE_KEY = 0x21,
SINOWEALTH_BUTTON_TYPE_MULTIMEDIA_KEY = 0x22,
SINOWEALTH_BUTTON_TYPE_REPEATED = 0x31,
SINOWEALTH_BUTTON_TYPE_SWITCH_DPI = 0x41,
SINOWEALTH_BUTTON_TYPE_DPI_LOCK = 0x42,
SINOWEALTH_BUTTON_TYPE_SPECIAL = 0x50,
SINOWEALTH_BUTTON_TYPE_MACRO = 0x70,
} __attribute__((packed));
_Static_assert(sizeof(enum sinowealth_button_type) == sizeof(uint8_t), "Invalid size");
/* Bit masks. */
enum sinowealth_button_key_modifiers {
SINOWEALTH_BUTTON_KEY_MODIFIER_LEFTCTRL = 0x01,
SINOWEALTH_BUTTON_KEY_MODIFIER_LEFTSHIFT = 0x02,
SINOWEALTH_BUTTON_KEY_MODIFIER_LEFTALT = 0x04,
SINOWEALTH_BUTTON_KEY_MODIFIER_LEFTMETA = 0x08,
} __attribute__((packed));
_Static_assert(sizeof(enum sinowealth_button_key_modifiers) == sizeof(uint8_t), "Invalid size");
enum sinowealth_button_macro_mode {
/* Repeat <option> times. */
SINOWEALTH_BUTTON_MACRO_MODE_REPEAT = 0x1,
/* Repeat until any button is pressed. */
SINOWEALTH_BUTTON_MACRO_MODE_REPEAT_UNTIL_PRESSED = 0x2,
/* Repeat until released. */
SINOWEALTH_BUTTON_MACRO_MODE_REPEAT_UNTIL_RELEASED = 0x4,
/* Anything above freezes up the mouse. */
} __attribute__((packed));
_Static_assert(sizeof(enum sinowealth_button_macro_mode) == sizeof(uint8_t), "Invalid size");
struct sinowealth_button_data {
enum sinowealth_button_type type;
union {
/* In some button types, byte are bit masks of enabled buttons.
* If several bits are enabled at the same time, their corresponding buttons
* will be activated at the same time.
*/
uint8_t data[3];
struct {
/* DPI divided by 100. */
uint8_t dpi;
uint8_t padding[2];
} dpi_lock;
struct {
enum sinowealth_button_key_modifiers modifiers;
uint8_t key;
uint8_t padding;
} key;
struct {
/* Macro index starting with 1.
*
* For consistency we do it like this: `button_index + (profile_index * button_count)`.
* This may clash with macros set by official software.
*/
uint8_t index;
enum sinowealth_button_macro_mode mode;
/* Mode-specific option.
*
* For 0x1:
* Value is repeat count.
*
* Other modes don't have any options.
*/
uint8_t option;
} macro;
struct {
/* Button index. */
uint8_t index;
uint8_t delay;
/* If zero, then repeat for as long as the button is held. */
uint8_t count;
} repeated_button;
};
} __attribute__((packed));
_Static_assert(sizeof(struct sinowealth_button_data) == sizeof(uint32_t), "Invalid size");
struct sinowealth_button_report {
uint8_t report_id;
uint8_t command_id;
uint8_t unknown1;
/* 0x0 --- read.
* <size of configuration> - 8 --- write.
*/
uint8_t config_write;
uint8_t unknown2[4];
struct sinowealth_button_data buttons[20];
uint8_t padding[SINOWEALTH_CONFIG_REPORT_SIZE - SINOWEALTH_BUTTON_SIZE];
} __attribute__((packed));
_Static_assert(sizeof(struct sinowealth_button_report) == SINOWEALTH_CONFIG_REPORT_SIZE, "Invalid size");
enum sinowealth_macro_command {
SINOWEALTH_MACRO_COMMAND_BUTTON_PRESS = 0x10,
SINOWEALTH_MACRO_COMMAND_BUTTON_RELEASE = 0x90,
SINOWEALTH_MACRO_COMMAND_KEY_PRESS = 0x50,
SINOWEALTH_MACRO_COMMAND_KEY_RELEASE = 0xd0,
} __attribute__((packed));
_Static_assert(sizeof(enum sinowealth_macro_command) == sizeof(uint8_t), "Invalid size");
struct sinowealth_macro_event {
enum sinowealth_macro_command command;
/* Use `1` for no delay.
* In case this is set to `0`, the event will ignored.
*/
uint8_t delay;
union {
/* HID button usage.
*
* 0x1 - button 1;
* 0x2 - button 2;
* 0x4 - button 3;
* and so forth.
*/
uint8_t button;
/* HID keyboard usage.
*
* @ref ratbag_hidraw_get_keyboard_usage_from_keycode.
*/
uint8_t key;
};
};
_Static_assert(sizeof(struct sinowealth_macro_event) == sizeof(uint8_t[3]), "Invalid size");
struct sinowealth_macro_report {
uint8_t report_id;
uint8_t command_id;
uint8_t unknown1; // 0x2 when writing
uint8_t _empty1[5];
/* The index of this macro.
*
* In original software it may differ from index of the button where it's used.
* It's hard to keep track of, so we just set it like this:
* `button->index + (profile->index * BUTTON_COUNT)`.
* Because we do it like this, we may overwrite some already existing macro,
* which is not really good, but this can't be improved until we find a way
* to read macros from the mouse.
*/
uint8_t index;
uint8_t _empty2;
/* The amount of events going next that will get processed by mouse.
* If there are more events than this number, they will just get ignored.
*/
uint8_t event_count;
struct sinowealth_macro_event events[SINOWEALTH_MACRO_LENGTH_MAX];
uint8_t padding[SINOWEALTH_CONFIG_REPORT_SIZE - SINOWEALTH_MACRO_SIZE];
};
_Static_assert(sizeof(struct sinowealth_macro_report) == SINOWEALTH_CONFIG_REPORT_SIZE, "Invalid size");
/* Data related to mouse we store for ourselves. */
struct sinowealth_data {
/* Whether the device uses REPORT_ID_CONFIG or REPORT_ID_CONFIG_LONG. */
bool is_long;
enum sinowealth_led_format led_type;
unsigned int button_count;
unsigned int config_size;
unsigned int led_count;
struct sinowealth_button_report buttons[SINOWEALTH_NUM_PROFILES];
struct sinowealth_config_report configs[SINOWEALTH_NUM_PROFILES];
};
struct sinowealth_button_mapping {
struct sinowealth_button_data data;
struct ratbag_button_action action;
};
static const struct sinowealth_button_mapping sinowealth_button_map[] = {
{ { SINOWEALTH_BUTTON_TYPE_BUTTON, { { 0x01 } } }, BUTTON_ACTION_BUTTON(1) },
{ { SINOWEALTH_BUTTON_TYPE_BUTTON, { { 0x02 } } }, BUTTON_ACTION_BUTTON(2) },
{ { SINOWEALTH_BUTTON_TYPE_BUTTON, { { 0x04 } } }, BUTTON_ACTION_BUTTON(3) },
{ { SINOWEALTH_BUTTON_TYPE_BUTTON, { { 0x08 } } }, BUTTON_ACTION_BUTTON(5) },
{ { SINOWEALTH_BUTTON_TYPE_BUTTON, { { 0x10 } } }, BUTTON_ACTION_BUTTON(4) },
/* None of the other bits do anything. */
/* First data byte is a 0-255 range. */
{ { SINOWEALTH_BUTTON_TYPE_WHEEL, { { 0x1 } } }, BUTTON_ACTION_SPECIAL(RATBAG_BUTTON_ACTION_SPECIAL_WHEEL_UP) },
{ { SINOWEALTH_BUTTON_TYPE_WHEEL, { { 0xff } } }, BUTTON_ACTION_SPECIAL(RATBAG_BUTTON_ACTION_SPECIAL_WHEEL_DOWN) },
/* None of the other bits do anything. */
{ { SINOWEALTH_BUTTON_TYPE_MULTIMEDIA_KEY, { { 0x01 } } }, BUTTON_ACTION_KEY(KEY_NEXTSONG) },
{ { SINOWEALTH_BUTTON_TYPE_MULTIMEDIA_KEY, { { 0x02 } } }, BUTTON_ACTION_KEY(KEY_PREVIOUSSONG) },
{ { SINOWEALTH_BUTTON_TYPE_MULTIMEDIA_KEY, { { 0x04 } } }, BUTTON_ACTION_KEY(KEY_STOPCD) },
{ { SINOWEALTH_BUTTON_TYPE_MULTIMEDIA_KEY, { { 0x08 } } }, BUTTON_ACTION_KEY(KEY_PLAYPAUSE) },
{ { SINOWEALTH_BUTTON_TYPE_MULTIMEDIA_KEY, { { 0x10 } } }, BUTTON_ACTION_KEY(KEY_MUTE) },
{ { SINOWEALTH_BUTTON_TYPE_MULTIMEDIA_KEY, { { 0x20 } } }, BUTTON_ACTION_KEY(KEY_UNKNOWN) }, /* Hidden. */
{ { SINOWEALTH_BUTTON_TYPE_MULTIMEDIA_KEY, { { 0x40 } } }, BUTTON_ACTION_KEY(KEY_VOLUMEUP) },
{ { SINOWEALTH_BUTTON_TYPE_MULTIMEDIA_KEY, { { 0x80 } } }, BUTTON_ACTION_KEY(KEY_VOLUMEDOWN) },
{ { SINOWEALTH_BUTTON_TYPE_MULTIMEDIA_KEY, { { 0x0, 0x01 } } }, BUTTON_ACTION_KEY(KEY_CONFIG) },
{ { SINOWEALTH_BUTTON_TYPE_MULTIMEDIA_KEY, { { 0x0, 0x02 } } }, BUTTON_ACTION_KEY(KEY_FILE) },
/* 0x04 makes mouse send something, but it's not processed by Linux. Hidden. */
/* 0x08 makes mouse send something, but it's not processed by Linux. Hidden. */
{ { SINOWEALTH_BUTTON_TYPE_MULTIMEDIA_KEY, { { 0x0, 0x10 } } }, BUTTON_ACTION_KEY(KEY_MAIL) },
{ { SINOWEALTH_BUTTON_TYPE_MULTIMEDIA_KEY, { { 0x0, 0x20 } } }, BUTTON_ACTION_KEY(KEY_CALC) },
{ { SINOWEALTH_BUTTON_TYPE_MULTIMEDIA_KEY, { { 0x0, 0x40 } } }, BUTTON_ACTION_KEY(KEY_UNKNOWN) }, /* Hidden. */
/* 0x80 makes mouse send something, but it's not processed by Linux. Hidden. */
{ { SINOWEALTH_BUTTON_TYPE_MULTIMEDIA_KEY, { { 0x0, 0x0, 0x2 } } }, BUTTON_ACTION_KEY(KEY_HOMEPAGE) },
{ { SINOWEALTH_BUTTON_TYPE_MULTIMEDIA_KEY, { { 0x0, 0x0, 0x4 } } }, BUTTON_ACTION_KEY(KEY_BACK) }, /* Hidden. */
{ { SINOWEALTH_BUTTON_TYPE_MULTIMEDIA_KEY, { { 0x0, 0x0, 0x8 } } }, BUTTON_ACTION_KEY(KEY_FORWARD) }, /* Hidden. */
{ { SINOWEALTH_BUTTON_TYPE_MULTIMEDIA_KEY, { { 0x0, 0x0, 0x10 } } }, BUTTON_ACTION_KEY(KEY_STOP) }, /* Hidden. */
{ { SINOWEALTH_BUTTON_TYPE_MULTIMEDIA_KEY, { { 0x0, 0x0, 0x20 } } }, BUTTON_ACTION_KEY(KEY_REFRESH) }, /* Hidden. */
{ { SINOWEALTH_BUTTON_TYPE_MULTIMEDIA_KEY, { { 0x0, 0x0, 0x40 } } }, BUTTON_ACTION_KEY(KEY_BOOKMARKS) }, /* Hidden. */
{ { SINOWEALTH_BUTTON_TYPE_MULTIMEDIA_KEY, { { 0x0, 0x0, 0x80 } } }, BUTTON_ACTION_KEY(KEY_UNKNOWN) }, /* Hidden. */
{ { SINOWEALTH_BUTTON_TYPE_SWITCH_DPI, { { 0x0 } } }, BUTTON_ACTION_SPECIAL(RATBAG_BUTTON_ACTION_SPECIAL_RESOLUTION_CYCLE_UP) },
{ { SINOWEALTH_BUTTON_TYPE_SWITCH_DPI, { { 0x1 } } }, BUTTON_ACTION_SPECIAL(RATBAG_BUTTON_ACTION_SPECIAL_RESOLUTION_UP) },
{ { SINOWEALTH_BUTTON_TYPE_SWITCH_DPI, { { 0x2 } } }, BUTTON_ACTION_SPECIAL(RATBAG_BUTTON_ACTION_SPECIAL_RESOLUTION_DOWN) },
/* None of the other bits do anything. */
{ { SINOWEALTH_BUTTON_TYPE_SPECIAL, { { 0x1 } } }, BUTTON_ACTION_NONE },
#if SINOWEALTH_NUM_PROFILES > 1
/* See the note near @ref SINOWEALTH_NUM_PROFILES. */
/* Hidden. */
{ { SINOWEALTH_BUTTON_TYPE_SPECIAL, { { 0x6 } } }, BUTTON_ACTION_SPECIAL(RATBAG_BUTTON_ACTION_SPECIAL_PROFILE_UP) },
#endif
/* This must defined after `SPECIAL` type so that correct raw data
* for action type `NONE` is used. */
{ { SINOWEALTH_BUTTON_TYPE_NONE, { { 0 } } }, BUTTON_ACTION_NONE },
};
/* Check if two given button data structs are equal.
*/
static bool
sinowealth_button_data_is_equal(const struct sinowealth_button_data *lhs, const struct sinowealth_button_data *rhs)
{
if (lhs->type != rhs->type)
return false;
for (unsigned int i = 0; i < sizeof(lhs->data); ++i) {
if (lhs->data[i] != rhs->data[i]) {
return false;
}
}
return true;
}
/* Convert a button action to raw data using the `sinowealth_button_map`.
* NOTE: It does not contain all of the button types, as some of them are
* better made programmatically. See @ref sinowealth_update_buttons_from_profile.
*
* @param data Struct to write to.
*
* @return 0 on success or 1 if such action is not in the map.
*/
static int
sinowealth_button_action_to_raw(const struct ratbag_button_action *action, struct sinowealth_button_data *data)
{
const struct sinowealth_button_mapping *mapping = NULL;
ARRAY_FOR_EACH(sinowealth_button_map, mapping) {
if (ratbag_button_action_match(&mapping->action, action)) {
memcpy(data, &mapping->data, sizeof(struct sinowealth_button_data));
return 0;
}
}
return 1;
}
/* Convert raw button data to a button action using the `sinowealth_button_map`.
* NOTE: It does not contain all of the button types, as some of them are
* better made programmatically. See @ref sinowealth_update_profile_from_buttons.
*
* @return Button action or NULL if such action is not in the map. */
static const struct ratbag_button_action *
sinowealth_raw_to_button_action(const struct sinowealth_button_data *data)
{
const struct sinowealth_button_mapping *mapping = NULL;
ARRAY_FOR_EACH(sinowealth_button_map, mapping) {
if (!sinowealth_button_data_is_equal(data, &mapping->data))
continue;
return &mapping->action;
}
return NULL;
}
struct sinowealth_report_rate_mapping {
uint8_t raw;
unsigned int report_rate;
};
static const struct sinowealth_report_rate_mapping sinowealth_report_rate_map[] = {
{ 0x1, 125 },
{ 0x2, 250 },
{ 0x3, 500 },
{ 0x4, 1000 },
};
/* @return Internal report rate representation or 0 on error. */
static uint8_t
sinowealth_report_rate_to_raw(unsigned int report_rate)
{
const struct sinowealth_report_rate_mapping *mapping = NULL;
ARRAY_FOR_EACH(sinowealth_report_rate_map, mapping)
if (mapping->report_rate == report_rate)
return mapping->raw;
return 0;
}
/* @return Report rate in hz or 0 on error. */
static unsigned int
sinowealth_raw_to_report_rate(uint8_t raw)
{
const struct sinowealth_report_rate_mapping *mapping = NULL;
ARRAY_FOR_EACH(sinowealth_report_rate_map, mapping)
if (mapping->raw == raw)
return mapping->report_rate;
return 0;
}
/* @return Maximum DPI for sensor `sensor` or 0 on error. */
static unsigned int
sinowealth_get_max_dpi_for_sensor(enum sinowealth_sensor sensor)
{
switch (sensor) {
case SINOWEALTH_SENSOR_PMW3327: return 10200;
case SINOWEALTH_SENSOR_PMW3360: return 12000;
case SINOWEALTH_SENSOR_PMW3389: return 16000;
default: return SINOWEALTH_DPI_FALLBACK;
}
}
/* Convert sensor-encoded resolution `raw` to DPI.
*
* @ref sinowealth_dpis.
*/
static unsigned int
sinowealth_raw_to_dpi(struct ratbag_device *device, unsigned int raw)
{
struct sinowealth_data *drv_data = device->drv_data;
enum sinowealth_sensor sensor = drv_data->configs[0].sensor_type;
if (sensor == SINOWEALTH_SENSOR_PMW3327 || sensor == SINOWEALTH_SENSOR_PMW3360)
raw += 1;
unsigned int dpi = raw * 100;
return dpi;
}
/* Convert DPI `dpi` to sensor-encoded resolution.
*
* @ref sinowealth_dpis.
*/
static uint8_t
sinowealth_dpi_to_raw(struct ratbag_device *device, unsigned int dpi)
{
struct sinowealth_data *drv_data = device->drv_data;
enum sinowealth_sensor sensor = drv_data->configs[0].sensor_type;
assert(dpi >= SINOWEALTH_DPI_MIN && dpi <= sinowealth_get_max_dpi_for_sensor(sensor));
uint8_t raw = (uint8_t)(dpi / 100);
if (sensor == SINOWEALTH_SENSOR_PMW3327 || sensor == SINOWEALTH_SENSOR_PMW3360)
raw -= 1;
return raw;
}
/* Convert internal mouse color `raw` to color.
* If LED type defined in the device data is incorrect, RBG color order is used.
*/
static struct ratbag_color
sinowealth_raw_to_color(struct ratbag_device *device, struct sinowealth_color raw_color)
{
struct sinowealth_data *drv_data = device->drv_data;
struct ratbag_color color;
switch (drv_data->led_type) {
/* Fall back to RBG if the LED type is incorrect. */
default:
case SINOWEALTH_LED_TYPE_RBG:
color.red = raw_color.data[0];
color.green = raw_color.data[2];
color.blue = raw_color.data[1];
break;
case SINOWEALTH_LED_TYPE_RGB:
color.red = raw_color.data[0];
color.green = raw_color.data[1];
color.blue = raw_color.data[2];
break;
}
return color;
}
/* Convert color `color` to internal representation of color of the mouse.
* If LED type defined in the device data is incorrect, RBG color order is used.
*/
static struct sinowealth_color
sinowealth_color_to_raw(struct ratbag_device *device, struct ratbag_color color)
{
struct sinowealth_data *drv_data = device->drv_data;
struct sinowealth_color raw_color;
switch (drv_data->led_type) {
/* Fall back to RBG if the LED type is incorrect. */
default:
case SINOWEALTH_LED_TYPE_RBG:
raw_color.data[0] = (uint8_t)color.red;
raw_color.data[1] = (uint8_t)color.blue;
raw_color.data[2] = (uint8_t)color.green;
break;
case SINOWEALTH_LED_TYPE_RGB:
raw_color.data[0] = (uint8_t)color.red;
raw_color.data[1] = (uint8_t)color.green;
raw_color.data[2] = (uint8_t)color.blue;
break;
}
return raw_color;
}
/* Get brightness to use with ratbag's API from RGB mode `mode`. */
static unsigned int
sinowealth_rgb_mode_to_brightness(struct sinowealth_rgb_mode mode)
{
/* Convert 0-4 to 0-255. */
return min(mode.brightness * 64, 255);
}
/* Convert 8 bit brightness value to internal representation of brightness of the mouse. */
static uint8_t
sinowealth_brightness_to_rgb_mode(uint8_t brightness)
{
/* Convert 0-255 to 0-4. */
return (brightness + 1) / 64;
}
/* @return Effect duration or `0` on error. */
static unsigned int
sinowealth_rgb_mode_to_duration(struct sinowealth_rgb_mode mode)
{
switch (mode.speed) {
case 0: return 10000; /* static: does not translate to duration */
case 1: return 1500;
case 2: return 1000;
case 3: return 500;
default: return 0;
}
}
/* Convert duration value `duration` to representation of brightness of the mouse.
*
* @param duration Duration in milliseconds.
*/
static uint8_t
sinowealth_duration_to_rgb_mode(unsigned int duration)
{
uint8_t mode = 0;
if (duration <= 500) {
mode |= 3;
} else if (duration <= 1000) {
mode |= 2;
} else {
mode |= 1;
}
return mode;
}
/* Fill LED `led` with values from mode `mode`. */
static void
sinowealth_set_led_from_rgb_mode(struct ratbag_led *led, struct sinowealth_rgb_mode mode)
{
led->brightness = sinowealth_rgb_mode_to_brightness(mode);
led->ms = sinowealth_rgb_mode_to_duration(mode);
}
/* Convert data in LED `led` to RGB mode. */
static struct sinowealth_rgb_mode
sinowealth_led_to_rgb_mode(const struct ratbag_led *led)
{
struct sinowealth_rgb_mode mode;
mode.brightness = sinowealth_brightness_to_rgb_mode((uint8_t)led->brightness);
mode.speed = sinowealth_duration_to_rgb_mode(led->ms);
return mode;
}
static uint8_t
sinowealth_get_buttons_command(size_t profile_index)
{
uint8_t config_command = 0;
switch (profile_index) {
case 0:
config_command = SINOWEALTH_CMD_GET_BUTTONS;
break;
case 1:
config_command = SINOWEALTH_CMD_GET_BUTTONS2;
break;
default:
abort();
break;
}
return config_command;
}
static uint8_t
sinowealth_get_config_command(size_t profile_index)
{
uint8_t config_command = 0;
switch (profile_index) {
case 0:
config_command = SINOWEALTH_CMD_GET_CONFIG;
break;
case 1:
config_command = SINOWEALTH_CMD_GET_CONFIG2;
break;
default:
abort();
break;
}
return config_command;
}
/* Do a read query.
*
* After an error assume `buffer` now has garbage data.
*
* @return 0 on success or a negative errno.
*/
static int
sinowealth_query_read(struct ratbag_device *device, uint8_t buffer[], unsigned int buffer_length)
{
int rc = 0;
/* Buffer's first byte is always the report ID. */
const uint8_t report_id = buffer[0];
/* Buffer's second byte in case of SinoWealth is always the command ID. */
const uint8_t query_command = buffer[1];
/* The way we retrieve data from SinoWealth is as follows:
*
* - Set a feature report with first two bytes corresponding to the
* wanted command.
*
* - Get a feature report with the same report ID and buffer length.
* The buffer can be reused from the previous step for more efficiency.
* We also do this to reduce the amount of arguments in the function.
*/
rc = ratbag_hidraw_set_feature_report(device, report_id, buffer, buffer_length);
if (rc < 0) {
return rc;
}
if (rc != (int)buffer_length) {
log_error(device->ratbag, "Unexpected amount of transmitted data: %d (instead of %u)\n", rc, buffer_length);
return -EIO;
}
rc = ratbag_hidraw_get_feature_report(device, report_id, buffer, buffer_length);
if (rc < 0) {
return rc;
}
if (rc != (int)buffer_length) {
log_error(device->ratbag, "Unexpected amount of transmitted data: %d (instead of %u)\n", rc, buffer_length);
return -EIO;
}
/* Check if the response we got is for the correct command. */
if (buffer[1] != query_command) {
log_error(device->ratbag, "Could not do a read query with command %#x, got response for command %#x instead\n", query_command, buffer[1]);
return -EIO;
}
return 0;
}
/* Do a write query.
*
* @return 0 on success or a negative errno.
*/
static int
sinowealth_query_write(struct ratbag_device *device, uint8_t buffer[], unsigned int buffer_length)
{
int rc = 0;
/* Buffer's first byte is always the report ID. */
const uint8_t report_id = buffer[0];
rc = ratbag_hidraw_set_feature_report(device, report_id, buffer, buffer_length);
if (rc < 0) {
log_error(device->ratbag, "Error while writing data: %s (%d)\n", strerror(-rc), rc);
return rc;
}
if (rc != (int)buffer_length) {
log_error(device->ratbag, "Unexpeced amount of written data: %d (instead of %u)\n", rc, buffer_length);
return -EIO;
}
return 0;
}
/* @return Active profile index or a negative errno. */
static int
sinowealth_get_active_profile(struct ratbag_device *device)
{
int rc = 0;
uint8_t buf[SINOWEALTH_CMD_SIZE] = { SINOWEALTH_REPORT_ID_CMD, SINOWEALTH_CMD_PROFILE };
rc = sinowealth_query_read(device, buf, sizeof(buf));
if (rc < 0) {
log_error(device->ratbag, "Could not get device's active profile: %s (%d)\n", strerror(-rc), rc);
return rc;
}
unsigned int index = buf[2] - 1;
return (int)index;
}
/* Make the profile at index `index` the active one.
*
* @return 0 on success or a negative errno.
*/
static int
sinowealth_set_active_profile(struct ratbag_device *device, unsigned int index)
{
if (index >= SINOWEALTH_NUM_PROFILES) {
log_error(device->ratbag, "Profile index %u is out of range\n", index);
return -EINVAL;
}
int rc = 0;
uint8_t buf[SINOWEALTH_CMD_SIZE] = { SINOWEALTH_REPORT_ID_CMD, SINOWEALTH_CMD_PROFILE, (uint8_t)index + 1u };
rc = sinowealth_query_write(device, buf, sizeof(buf));
if (rc < 0) {
log_error(device->ratbag, "Error while selecting profile: %s (%d)\n", strerror(-rc), rc);
return rc;
}
return 0;
}
/* Fill buffer `out` with firmware version.
*
* @param out The buffer output will be written to.
*
* @return 0 on success or a negative errno.
*/
static int
sinowealth_get_fw_version(struct ratbag_device *device, char out[4])
{
int rc = 0;
uint8_t buf[SINOWEALTH_CMD_SIZE] = { SINOWEALTH_REPORT_ID_CMD, SINOWEALTH_CMD_FIRMWARE_VERSION };
rc = sinowealth_query_read(device, buf, sizeof(buf));
if (rc < 0) {
log_error(device->ratbag, "Couldn't read firmware version: %s (%d)\n", strerror(-rc), rc);
return rc;
}
memcpy(out, buf + 2, 4);
return 0;
}
/* @return Time in milliseconds or a negative errno. */
static int
sinowealth_get_debounce_time(struct ratbag_device *device)
{
int rc = 0;
uint8_t buf[SINOWEALTH_CMD_SIZE] = { SINOWEALTH_REPORT_ID_CMD, SINOWEALTH_CMD_DEBOUNCE };
rc = sinowealth_query_read(device, buf, sizeof(buf));
if (rc < 0) {
log_error(device->ratbag, "Could not read debounce time: %s (%d)\n", strerror(-rc), rc);
return rc;
}
return buf[2] * 2;
}
/* Set debounce time to `debounce_ms` milliseconds.
*
* @return 0 on success or a negative errno.
*/
static int
sinowealth_set_debounce_time(struct ratbag_device *device, int debounce_time_ms)
{
if (debounce_time_ms < SINOWEALTH_DEBOUNCE_MIN || debounce_time_ms > SINOWEALTH_DEBOUNCE_MAX) {
log_error(device->ratbag, "Debounce time %d is out of range %d-%d\n",
debounce_time_ms, SINOWEALTH_DEBOUNCE_MIN, SINOWEALTH_DEBOUNCE_MAX);
return -EINVAL;
}
int rc = 0;
uint8_t buf[SINOWEALTH_CMD_SIZE] = {
SINOWEALTH_REPORT_ID_CMD,
SINOWEALTH_CMD_DEBOUNCE,
debounce_time_ms / 2,
};
rc = sinowealth_query_write(device, buf, sizeof(buf));
if (rc < 0) {
log_error(device->ratbag, "Could not set debounce time: %s (%d)\n",
strerror(-rc), rc);
return rc;
}
return 0;
}
/* Print angle snapping (Cal line) and lift-off distance (LOD) modes.
*
* This is only confirmed to work on G-Wolves Hati where the way with
* config report doesn't work. This does not work on Glorious Model O.
*/
static int
sinowealth_print_long_lod_and_anglesnapping(struct ratbag_device *device)
{
int rc = 0;
/* TODO: implement angle snapping and lift-off distance changing once we have an API for that.
* To implement LOD changing here: set the third index to <whether you want LOD high or low> + 1.
* To implement angle snapping toggling here: set the fourth index to 1 or 0 to enable or disable accordingly.
*/
uint8_t buf[SINOWEALTH_CMD_SIZE] = { SINOWEALTH_REPORT_ID_CMD, SINOWEALTH_CMD_LONG_ANGLESNAPPING_AND_LOD };
rc = sinowealth_query_read(device, buf, sizeof(buf));
if (rc < 0) {
log_error(device->ratbag,
"Could not read lift-off distance and angle snapping values: %s (%d)\n",
strerror(-rc), rc);
return rc;
}
log_info(device->ratbag, "Lift-off distance is high: %u\n", buf[2] - 1);
log_info(device->ratbag, "Angle snapping enabled: %u\n", buf[3]);
return 0;
}
/* Read configuration data.
*
* This is the raw interaction with the mouse used by @ref sinowealth_read_raw_config
* and @ref sinowealth_read_raw_buttons.
*
* @return Count of bytes transferred or a negative errno.
*/
static int
sinowealth_query_read_config(struct ratbag_device *device, uint8_t config_cmd, uint8_t *buffer, unsigned int reply_len_min, unsigned int reply_len_max)
{
int rc = 0;
struct sinowealth_data *drv_data = device->drv_data;
{
uint8_t cmd[SINOWEALTH_CMD_SIZE] = { SINOWEALTH_REPORT_ID_CMD, config_cmd };
rc = sinowealth_query_write(device, cmd, sizeof(cmd));
if (rc < 0)
return rc;
}
{
const unsigned char config_report_id = drv_data->is_long ? SINOWEALTH_REPORT_ID_CONFIG_LONG : SINOWEALTH_REPORT_ID_CONFIG;
rc = ratbag_hidraw_get_feature_report(device, config_report_id, buffer, SINOWEALTH_CONFIG_REPORT_SIZE);
if (rc < 0) {
log_error(device->ratbag, "Could not read device configuration data: %s (%d)\n", strerror(-rc), rc);
return rc;
}
if (rc < (int)reply_len_min || rc > (int)reply_len_max) {
log_error(device->ratbag, "Unexpected amount of transmitted data: %d (should be between %u and %u)\n", rc, reply_len_min, reply_len_max);
return -EIO;
}
}
return rc;
}
/* Read button configuration data from the mouse and save it in drv_data.
*
* @return 0 on success or a negative errno.
*/
static int
sinowealth_read_raw_button_configs(struct ratbag_device *device)
{
int rc;
struct sinowealth_data *drv_data = device->drv_data;
for (size_t profile_index = 0; profile_index < SINOWEALTH_NUM_PROFILES; ++profile_index) {
const uint8_t config_command = sinowealth_get_buttons_command(profile_index);
struct sinowealth_button_report *buttons = &drv_data->buttons[profile_index];
rc = sinowealth_query_read_config(device, config_command, (uint8_t*)buttons, SINOWEALTH_BUTTON_SIZE, SINOWEALTH_BUTTON_SIZE);
if (rc < 0) {
log_error(device->ratbag, "Could not read button configuration data: %s (%d)\n", strerror(-rc), rc);
return rc;
}
};
return 0;
}
/* Read configuration data from the mouse and save it in drv_data.
*
* @return 0 on success or a negative errno.
*/
static int
sinowealth_read_raw_configs(struct ratbag_device *device)
{
int rc = 0;
struct sinowealth_data *drv_data = device->drv_data;
for (size_t profile_index = 0; profile_index < SINOWEALTH_NUM_PROFILES; ++profile_index) {
const uint8_t config_command = sinowealth_get_config_command(profile_index);
struct sinowealth_config_report *config = &drv_data->configs[profile_index];
rc = sinowealth_query_read_config(device, config_command, (uint8_t*)config, SINOWEALTH_CONFIG_SIZE_MIN, SINOWEALTH_CONFIG_SIZE_MAX);
if (rc < 0) {
log_error(device->ratbag, "Could not read device configuration data: %s (%d)\n", strerror(-rc), rc);
return rc;
}
};
/* In theory both of query calls are going to return the same amount
* of bytes. We'll use the output of the last one just because it's
* simpler.
*/
drv_data->config_size = (unsigned int)rc;
log_debug(device->ratbag, "Configuration size is %d bytes\n", drv_data->config_size);
return 0;
}
/* Update profile with values from raw configuration data. */
static void
sinowealth_update_profile_from_config(struct ratbag_profile *profile)
{
struct ratbag_device *device = profile->device;
struct sinowealth_data *drv_data = device->drv_data;
struct sinowealth_config_report *config = &drv_data->configs[profile->index];
struct ratbag_led *led = NULL;
struct ratbag_resolution *resolution = NULL;
/* Report rate */
const unsigned int hz = sinowealth_raw_to_report_rate(config->report_rate);
ratbag_profile_set_report_rate(profile, hz);
unsigned int enabled_dpi_count = 0;
ratbag_profile_for_each_resolution(profile, resolution) {
if (config->config_flags & SINOWEALTH_XY_INDEPENDENT) {
resolution->dpi_x = sinowealth_raw_to_dpi(device, config->dpis.independent[resolution->index].x);
resolution->dpi_y = sinowealth_raw_to_dpi(device, config->dpis.independent[resolution->index].y);
} else {
resolution->dpi_x = sinowealth_raw_to_dpi(device, config->dpis.dpis[resolution->index]);
resolution->dpi_y = resolution->dpi_x;
}
resolution->is_disabled = config->disabled_dpi_slots & (1 << resolution->index);
if (!resolution->is_disabled) {
/* NOTE: we mark this `1` unsigned explicitly as otherwise
* the right-hand side will become a signed integer and the
* comparison will be between expressions of different
* signedness.
*/
resolution->is_active = enabled_dpi_count == config->active_dpi - 1U;
resolution->is_default = resolution->is_active;
++enabled_dpi_count;
}
}
/* Body lighting */
if (drv_data->led_count > 0) {
led = ratbag_profile_get_led(profile, 0);
switch (config->rgb_effect) {
case RGB_OFF:
led->mode = RATBAG_LED_OFF;
break;
case RGB_SINGLE:
led->mode = RATBAG_LED_ON;
led->color = sinowealth_raw_to_color(device, config->single_color);
led->brightness = sinowealth_rgb_mode_to_brightness(config->single_mode);
break;
case RGB_BREATHING7:
/* NOTE: I don't know how mice would react to this, but this
* can happen if configuration data gets broken.
*/
if (config->breathing7_colorcount < 1) {
log_error(device->ratbag, "LED mode is multi-colored breathing, but there are no colors configured\n");
led->mode = RATBAG_LED_OFF;
break;
}
if (config->breathing7_colorcount > 1) {
log_debug(device->ratbag, "LED mode is multi-colored breathing, but we can only use one color. Using the first one...\n");
}
led->mode = RATBAG_LED_BREATHING;
led->color = sinowealth_raw_to_color(device, config->breathing7_colors[0]);
sinowealth_set_led_from_rgb_mode(led, config->breathing7_mode);
break;
case RGB_GLORIOUS:
case RGB_BREATHING:
case RGB_CONSTANT:
case RGB_RANDOM:
case RGB_TAIL:
case RGB_RAVE:
case RGB_WAVE:
led->mode = RATBAG_LED_CYCLE;
sinowealth_set_led_from_rgb_mode(led, config->glorious_mode);
break;
case RGB_BREATHING1:
led->mode = RATBAG_LED_BREATHING;
led->color = sinowealth_raw_to_color(device, config->breathing1_color);
sinowealth_set_led_from_rgb_mode(led, config->breathing1_mode);
break;
case RGB_NOT_SUPPORTED:
default:
log_error(device->ratbag, "Got unknown RGB effect: %d\n", config->rgb_effect);
break;
}
ratbag_led_unref(led);
}
}
static void
sinowealth_update_profile_from_buttons(struct ratbag_profile *profile)
{
struct ratbag_device *device = profile->device;
struct sinowealth_data *drv_data = device->drv_data;
struct sinowealth_button_report *buf = &drv_data->buttons[profile->index];
struct ratbag_button *button = NULL;
struct sinowealth_button_data button_data;
int rc = 0;
ratbag_profile_for_each_button(profile, button) {
button_data = buf->buttons[button->index];
const struct ratbag_button_action *action = sinowealth_raw_to_button_action(&button_data);
/* Match was found in the map, continue. */
if (action != NULL) {
button->action.action = action->action;
button->action.type = action->type;
continue;
}
/* Explicitly fall back to type `UNKNOWN` as `NONE` is the default. */
button->action.type = RATBAG_BUTTON_ACTION_TYPE_UNKNOWN;
switch (button_data.type) {
case SINOWEALTH_BUTTON_TYPE_KEY: {
unsigned int modifiers = 0;
if (button_data.key.modifiers & SINOWEALTH_BUTTON_KEY_MODIFIER_LEFTCTRL)
modifiers |= MODIFIER_LEFTCTRL;
if (button_data.key.modifiers & SINOWEALTH_BUTTON_KEY_MODIFIER_LEFTSHIFT)
modifiers |= MODIFIER_LEFTSHIFT;
if (button_data.key.modifiers & SINOWEALTH_BUTTON_KEY_MODIFIER_LEFTALT)
modifiers |= MODIFIER_LEFTALT;
if (button_data.key.modifiers & SINOWEALTH_BUTTON_KEY_MODIFIER_LEFTMETA)
modifiers |= MODIFIER_LEFTMETA;
const unsigned int key = ratbag_hidraw_get_keycode_from_keyboard_usage(device, button_data.key.key);
rc = ratbag_button_macro_new_from_keycode(button, key, modifiers);
if (rc < 0) {
log_error(device->ratbag, "Error while reading button %d\n", button->index);
button->action.type = RATBAG_BUTTON_ACTION_TYPE_UNKNOWN;
}
break;
}
case SINOWEALTH_BUTTON_TYPE_REPEATED: {
/* NOTE: We do not support such button actions yet. */
const uint8_t button_index = button_data.repeated_button.index;
const uint8_t repeat_delay = button_data.repeated_button.delay;
const uint8_t repeat_count = button_data.repeated_button.count;
log_debug(device->ratbag, "Read repeating button %u: %#x %#x %#x\n", button->index, button_index, repeat_delay, repeat_count);
break;
}
case SINOWEALTH_BUTTON_TYPE_DPI_LOCK: {
/* NOTE: We do not support such button actions yet. */
const unsigned int dpi = button_data.dpi_lock.dpi * 100;
log_debug(device->ratbag, "Read button %u locks DPI on %u\n", button->index, dpi);
break;
}
case SINOWEALTH_BUTTON_TYPE_MACRO: {
const uint8_t macro_index = button_data.macro.index;
const uint8_t mode = button_data.macro.mode;
const uint8_t option = button_data.macro.option;
log_debug(device->ratbag, "Read button %u activates macro %u: %#x %#x\n", button->index, macro_index, mode, option);
/* There is no known way to read a macro blob, so create a dummy
* macro event, so that the button action displays as a macro.
*/
const int key = 0; /* Dummy. */
const int modifiers = 0; /* Dummy. */
rc = ratbag_button_macro_new_from_keycode(button, key, modifiers);
if (rc < 0) {
log_error(device->ratbag, "Could not make a dummy macro\n");
button->action.type = RATBAG_BUTTON_ACTION_TYPE_UNKNOWN;
}
break;
}
default:
log_debug(device->ratbag, "Read button %u can't be determined: %#x %#x %#x %#x\n", button->index, button_data.type, button_data.data[0], button_data.data[1], button_data.data[2]);
break;
}
}
}
/* @return 0 on success or a negative errno. */
static int
sinowealth_button_set_key_action(struct ratbag_device *device, const struct ratbag_button *button, struct sinowealth_button_data *button_data)
{
assert(button->action.type == RATBAG_BUTTON_ACTION_TYPE_KEY);
const unsigned int key = button->action.action.key.key;
// libratbag doesn't support modifiers in `key` actions.
const unsigned int modifiers = 0;
const uint8_t raw_key = ratbag_hidraw_get_keyboard_usage_from_keycode(device, key);
if (raw_key == 0) {
log_debug(device->ratbag, "Could not set unsupported key %#x to button %u\n", key, button->index);
return -EINVAL;
}
button_data->type = SINOWEALTH_BUTTON_TYPE_KEY;
button_data->key.modifiers = modifiers;
button_data->key.key = raw_key;
return 0;
}
static int
sinowealth_update_buttons_from_profile(struct ratbag_profile *profile)
{
struct ratbag_device *device = profile->device;
struct sinowealth_data *drv_data = device->drv_data;
struct sinowealth_button_report *buttons = &drv_data->buttons[profile->index];
struct ratbag_button *button = NULL;
int rc = 0;
ratbag_profile_for_each_button(profile, button) {
if (!button->dirty)
continue;
struct ratbag_button_action *action = &button->action;
struct sinowealth_button_data *button_data = &buttons->buttons[button->index];
rc = sinowealth_button_action_to_raw(action, button_data);
/* Match was found in the map, continue. */
if (rc == 0) {
continue;
}
switch (action->type) {
case RATBAG_BUTTON_ACTION_TYPE_KEY:
sinowealth_button_set_key_action(device, button, button_data);
break;
case RATBAG_BUTTON_ACTION_TYPE_MACRO: {
/* Make the button activate a macro.
* The macro itself will be written later by @ref sinowealth_write_macros.
*/
button_data->type = SINOWEALTH_BUTTON_TYPE_MACRO;
button_data->macro.index = (uint8_t)(button->index + (profile->index * drv_data->button_count));
button_data->macro.mode = SINOWEALTH_BUTTON_MACRO_MODE_REPEAT;
button_data->macro.option = 1;
break;
}
default:
log_debug(device->ratbag, "Can't set unsupported action type %#x to button %u\n", action->action.special, button->index);
break;
}
}
return 0;
}
/* Update macro report `macro` with macro button action in button `button`. */
static void
sinowealth_update_macro_events_from_action(
struct ratbag_device *device,
struct ratbag_button *button,
struct sinowealth_macro_report *mouse_macro)
{
struct ratbag_button_action *action = &button->action;
assert(action->type == RATBAG_BUTTON_ACTION_TYPE_MACRO);
/* Reset the `events` field. Even if we don't do this, the mouse will ignore unneeded data. */
memset(mouse_macro->events, 0, sizeof(mouse_macro->events));
uint8_t raw_event_count = 0;
for (unsigned int i = 0; i < MAX_MACRO_EVENTS; ++i) {
struct ratbag_macro_event *ratbag_macro_event = &action->macro->events[i];
if (raw_event_count >= SINOWEALTH_MACRO_LENGTH_MAX) {
log_error(device->ratbag, "There are more events in the macro than the mouse supports\n");
/* Update the type of this event so that libratbag ignores
* unused events.
*/
ratbag_macro_event->type = RATBAG_MACRO_EVENT_NONE;
break;
};
if (ratbag_macro_event->type == RATBAG_MACRO_EVENT_NONE)
break;
switch (ratbag_macro_event->type) {
case RATBAG_MACRO_EVENT_KEY_PRESSED:
case RATBAG_MACRO_EVENT_KEY_RELEASED: {
const unsigned int key = ratbag_macro_event->event.key;
struct sinowealth_macro_event *mouse_macro_event = &mouse_macro->events[raw_event_count];
/* Fall back to delay of 1 ms as the field is required to
* be non-0.
* If a specific timeout value is need, it will be set in
* the next iteration of this loop.
*/
mouse_macro_event->delay = 1;
// If a button event, else a key event.
if (key == BTN_LEFT || key == BTN_RIGHT || key == BTN_MIDDLE) {
const uint8_t raw_button = 1 << (key - BTN_LEFT);
mouse_macro_event->command =
ratbag_macro_event->type == RATBAG_MACRO_EVENT_KEY_PRESSED ?
SINOWEALTH_MACRO_COMMAND_BUTTON_PRESS :
SINOWEALTH_MACRO_COMMAND_BUTTON_RELEASE;
mouse_macro_event->button = raw_button;
} else {
const uint8_t raw_key = ratbag_hidraw_get_keyboard_usage_from_keycode(device, key);
if (raw_key == 0) {
log_error(device->ratbag, "Macro for button %u: could not set unsupported key %#x\n", button->index, key);
continue;
}
mouse_macro_event->command =
ratbag_macro_event->type == RATBAG_MACRO_EVENT_KEY_PRESSED ?
SINOWEALTH_MACRO_COMMAND_KEY_PRESS :
SINOWEALTH_MACRO_COMMAND_KEY_RELEASE;
mouse_macro_event->key = raw_key;
}
++raw_event_count;
break;
}
case RATBAG_MACRO_EVENT_WAIT: {
unsigned int *timeout = &ratbag_macro_event->event.timeout;
/* Delay is a part of every macro event in SinoWealth mice,
* that is, it does not occupy a separate event slot and is
* set to the previous event.
*/
if (raw_event_count == 0) {
log_error(device->ratbag, "Macro for button %u: can't use timeout as the first event in macro\n", button->index);
break;
}
struct sinowealth_macro_event *prev_mouse_macro_event = &mouse_macro->events[raw_event_count - 1];
/* Limit timeout to 255 ms.
* Obviously we can't put more in 8 bytes.
*
* NOTE: Glorious Model O Software v1.0.9 allows you to set
* up to 4096 ms, but it's actually a bug and the sent
* number overflows.
*/
if (*timeout > 0xff)
*timeout = 0xff;
prev_mouse_macro_event->delay = (uint8_t)*timeout;
break;
}
case RATBAG_MACRO_EVENT_NONE:
/* Handled separately above. */
break;
case RATBAG_MACRO_EVENT_INVALID:
default:
abort();
break;
}
}
/* Update the event counter in the macro. */
mouse_macro->event_count = raw_event_count;
}
/*
* @return Supported device data for the device or `NULL`.
*/
static const struct sinowealth_device_data *
sinowealth_find_device_data(struct ratbag_device *device, const char *fw_version)
{
const struct ratbag_device_data *data = device->data;
const struct list *supported_devices = ratbag_device_data_sinowealth_get_supported_devices(data);
struct sinowealth_device_data *device_data = NULL;
list_for_each(device_data, supported_devices, link) {
if (device_data->fw_version == NULL || device_data->device_name == NULL) {
log_error(device->ratbag, "Skipping invalid device data\n");
continue;
}
if (!strneq(fw_version, device_data->fw_version, SINOWEALTH_FW_VERSION_LEN))
continue;
return device_data;
}
return NULL;
}
/* Initialize profiles for device `device`.
*
* @return 0 on success or a negative errno.
*/
static int
sinowealth_init_profile(struct ratbag_device *device)
{
int rc = 0;
struct ratbag_button *button = NULL;
struct ratbag_led *led = NULL;
struct ratbag_profile *profile = NULL;
struct ratbag_resolution *resolution = NULL;
struct sinowealth_data *drv_data = device->drv_data;
/* We only use this to detect whether RGB effects are available and
* what sensor is used so it doesn't matter which one we use.
* Technically they might have different values in the checked slot.
*/
struct sinowealth_config_report *config = &drv_data->configs[0];
char fw_version[SINOWEALTH_FW_VERSION_LEN + 1] = { 0 };
rc = sinowealth_get_fw_version(device, fw_version);
if (rc)
return rc;
ratbag_device_set_firmware_version(device, fw_version);
rc = sinowealth_read_raw_configs(device);
if (rc)
return rc;
rc = sinowealth_read_raw_button_configs(device);
if (rc)
return rc;
rc = sinowealth_get_active_profile(device);
if (rc < 0)
return rc;
/* If we are not compiled with support with support for this many profiles. */
if (rc >= SINOWEALTH_NUM_PROFILES) {
const unsigned int PROFILE_TO_USE = 0;
log_error(device->ratbag,
"Active profile index is %d, but our max is %d; "
"Will use profile %d instead; "
"Report this to libratbag developers!\n",
rc,
SINOWEALTH_NUM_PROFILES - 1,
PROFILE_TO_USE);
sinowealth_set_active_profile(device, PROFILE_TO_USE);
if (rc < 0)
return rc;
rc = (int)PROFILE_TO_USE;
}
const unsigned int active_profile_index = (unsigned int)rc;
log_debug(device->ratbag, "Active profile index: %d\n", rc);
const struct sinowealth_device_data *device_data = sinowealth_find_device_data(device, fw_version);
if (device_data == NULL) {
log_error(device->ratbag, "Device with firmware version %s is not supported\n", fw_version);
return -EINVAL;
}
drv_data->button_count = device_data->button_count;
drv_data->led_type = device_data->led_type;
log_info(device->ratbag, "Found device: %s\n", device_data->device_name);
/* LED count. */
drv_data->led_count = 0;
if (config->rgb_effect != RGB_NOT_SUPPORTED && drv_data->led_type != SINOWEALTH_LED_TYPE_NONE) {
drv_data->led_count += 1;
}
/* We may want to account for the DPI LEDs in the future.
* We don't support them yet, so it's not a priority now.
*/
/* Number of DPIs = all DPIs from min to max (inclusive). */
const unsigned int num_dpis = (sinowealth_get_max_dpi_for_sensor(config->sensor_type) - SINOWEALTH_DPI_MIN) / SINOWEALTH_DPI_STEP + 1;
ratbag_device_init_profiles(device, SINOWEALTH_NUM_PROFILES, SINOWEALTH_NUM_DPIS, drv_data->button_count, drv_data->led_count);
ratbag_device_for_each_profile(device, profile) {
profile->is_active = profile->index == active_profile_index;
}
rc = sinowealth_get_debounce_time(device);
/* Seems like some mice don't support debounce time changing.
*
* Examples:
* - ANT Esports GM500 (libratbag/libratbag#1296).
*/
if (rc >= 0) {
log_debug(device->ratbag, "Debounce time: %d ms\n", rc);
/* Implementation note: libratbag expects every profile to have
* separate debounce time values, but Sinowealth mice only have
* one global setting that applies to all profiles. To work
* around this, we only enable debounce time setting on the
* first profile.
*/
ratbag_device_for_each_profile(device, profile) {
profile->debounce = rc;
ratbag_profile_set_debounce_list(
profile, SINOWEALTH_DEBOUNCE_TIMES, ARRAY_LENGTH(SINOWEALTH_DEBOUNCE_TIMES));
break;
}
} else {
log_debug(device->ratbag, "Device doesn't support debounce time changing\n");
}
/* Generate DPI list */
unsigned int dpis[num_dpis];
for (unsigned int i = 0; i < num_dpis; i++) {
dpis[i] = SINOWEALTH_DPI_MIN + i * SINOWEALTH_DPI_STEP;
}
ratbag_device_for_each_profile(device, profile) {
ratbag_profile_for_each_button(profile, button) {
ratbag_button_enable_action_type(button, RATBAG_BUTTON_ACTION_TYPE_NONE);
ratbag_button_enable_action_type(button, RATBAG_BUTTON_ACTION_TYPE_BUTTON);
ratbag_button_enable_action_type(button, RATBAG_BUTTON_ACTION_TYPE_SPECIAL);
ratbag_button_enable_action_type(button, RATBAG_BUTTON_ACTION_TYPE_KEY);
ratbag_button_enable_action_type(button, RATBAG_BUTTON_ACTION_TYPE_MACRO);
}
ratbag_profile_for_each_resolution(profile, resolution) {
ratbag_resolution_set_dpi_list(resolution, dpis, num_dpis);
ratbag_resolution_set_cap(resolution, RATBAG_RESOLUTION_CAP_SEPARATE_XY_RESOLUTION);
ratbag_resolution_set_cap(resolution, RATBAG_RESOLUTION_CAP_DISABLE);
}
/* Set up available report rates. */
unsigned int report_rates[] = { 125, 250, 500, 1000 };
ratbag_profile_set_report_rate_list(profile, report_rates, ARRAY_LENGTH(report_rates));
/* Set up LED capabilities */
if (drv_data->led_count > 0) {
led = ratbag_profile_get_led(profile, 0);
led->colordepth = RATBAG_LED_COLORDEPTH_RGB_888;
ratbag_led_set_mode_capability(led, RATBAG_LED_OFF);
ratbag_led_set_mode_capability(led, RATBAG_LED_ON);
ratbag_led_set_mode_capability(led, RATBAG_LED_CYCLE);
ratbag_led_set_mode_capability(led, RATBAG_LED_BREATHING);
ratbag_led_unref(led);
}
}
return 0;
}
static int
sinowealth_test_hidraw(struct ratbag_device *device)
{
int rc = 0;
/* Only the keyboard interface has this report */
rc = ratbag_hidraw_has_report(device, SINOWEALTH_REPORT_ID_CONFIG);
if (rc)
return rc;
rc = ratbag_hidraw_has_report(device, SINOWEALTH_REPORT_ID_CONFIG_LONG);
if (rc) {
struct sinowealth_data *drv_data = device->drv_data;
drv_data->is_long = true;
return rc;
}
return 0;
}
/* Write raw button configuration data in drv_data to the mouse.
*
* @return 0 on success or a negative errno.
*/
static int
sinowealth_write_buttons(struct ratbag_device *device)
{
int rc = 0;
struct sinowealth_data *drv_data = device->drv_data;
const uint8_t config_report_id = drv_data->is_long ? SINOWEALTH_REPORT_ID_CONFIG_LONG : SINOWEALTH_REPORT_ID_CONFIG;
for (size_t profile_index = 0; profile_index < SINOWEALTH_NUM_PROFILES; ++profile_index) {
struct sinowealth_button_report *buttons = &drv_data->buttons[profile_index];
buttons->report_id = config_report_id;
buttons->command_id = sinowealth_get_buttons_command(profile_index);
buttons->config_write = SINOWEALTH_BUTTON_SIZE - 8;
rc = sinowealth_query_write(device, (uint8_t*)buttons, sizeof(*buttons));
if (rc < 0) {
log_error(device->ratbag, "Error while writing buttons: %s (%d)\n", strerror(-rc), rc);
return rc;
}
}
return 0;
}
/* Write raw configuration data in drv_data to the mouse.
*
* @return 0 on success or a negative errno.
*/
static int
sinowealth_write_configs(struct ratbag_device *device)
{
int rc = 0;
struct sinowealth_data *drv_data = device->drv_data;
const uint8_t config_report_id = drv_data->is_long ? SINOWEALTH_REPORT_ID_CONFIG_LONG : SINOWEALTH_REPORT_ID_CONFIG;
for (size_t profile_index = 0; profile_index < SINOWEALTH_NUM_PROFILES; ++profile_index) {
struct sinowealth_config_report *config = &drv_data->configs[profile_index];
config->report_id = config_report_id;
config->command_id = sinowealth_get_config_command(profile_index);
config->config_write = (uint8_t)drv_data->config_size - 8;
rc = sinowealth_query_write(device, (uint8_t*)config, sizeof(*config));
if (rc < 0) {
log_error(device->ratbag, "Error while writing config %zu: %s (%d)\n", profile_index, strerror(-rc), rc);
return rc;
}
}
return 0;
}
static int
sinowealth_write_macros(struct ratbag_device *device)
{
int rc = 0;
struct ratbag_button *button = NULL;
struct ratbag_profile *profile = NULL;
struct sinowealth_data *drv_data = device->drv_data;
const uint8_t config_report_id = drv_data->is_long ? SINOWEALTH_REPORT_ID_CONFIG_LONG : SINOWEALTH_REPORT_ID_CONFIG;
/* NOTE: We will reuse the same buffer for all commands and reset it's `events` field for every button. */
struct sinowealth_macro_report macro = { 0 };
macro.report_id = config_report_id;
macro.command_id = SINOWEALTH_CMD_MACRO;
macro.unknown1 = 0x2;
ratbag_device_for_each_profile(device, profile) {
ratbag_profile_for_each_button(profile, button) {
if (!button->dirty)
continue;
struct ratbag_button_action *action = &button->action;
/* Ignore non macro actions.
* They were already handled by @ref sinowealth_update_profile_from_buttons.
*/
if (action->type != RATBAG_BUTTON_ACTION_TYPE_MACRO)
continue;
macro.index = (uint8_t)(button->index + (profile->index * drv_data->button_count));
sinowealth_update_macro_events_from_action(device, button, &macro);
rc = sinowealth_query_write(device, (uint8_t*)&macro, sizeof(macro));
if (rc < 0) {
log_error(device->ratbag, "Error while writing macro %u: %s (%d)\n", macro.index, strerror(-rc), rc);
return rc;
}
}
}
return 0;
}
static int
sinowealth_probe(struct ratbag_device *device)
{
int rc = 0;
struct ratbag_profile *profile = NULL;
struct sinowealth_data *drv_data = NULL;
drv_data = zalloc(sizeof(*drv_data));
ratbag_set_drv_data(device, drv_data);
rc = ratbag_find_hidraw(device, sinowealth_test_hidraw);
if (rc)
goto err;
rc = sinowealth_init_profile(device);
if (rc) {
rc = -ENODEV;
goto err;
}
ratbag_device_for_each_profile(device, profile) {
sinowealth_update_profile_from_config(profile);
sinowealth_update_profile_from_buttons(profile);
}
if (drv_data->is_long)
sinowealth_print_long_lod_and_anglesnapping(device);
return 0;
err:
free(drv_data);
ratbag_set_drv_data(device, NULL);
return rc;
}
/* Update saved raw configuration data of the mouse with values from profile `profile`. */
static void
sinowealth_update_config_from_profile(struct ratbag_profile *profile)
{
struct ratbag_device *device = profile->device;
struct sinowealth_data *drv_data = device->drv_data;
struct sinowealth_config_report *config = &drv_data->configs[profile->index];
struct ratbag_led *led = NULL;
struct ratbag_resolution *resolution = NULL;
uint8_t dpi_enabled = 0;
/* Update report rate. */
uint8_t reported_rate = sinowealth_report_rate_to_raw(profile->hz);
if (reported_rate == 0) {
log_error(device->ratbag, "Incorrect report rate %u was requested\n", profile->hz);
/* Fall back to 125hz. */
reported_rate = sinowealth_report_rate_to_raw(125);
profile->hz = 125;
}
config->report_rate = reported_rate;
/* Check if any resolution requires independent XY DPIs */
config->config_flags &= ~SINOWEALTH_XY_INDEPENDENT;
ratbag_profile_for_each_resolution(profile, resolution) {
if (resolution->dpi_x != resolution->dpi_y && resolution->dpi_x && resolution->dpi_y) {
config->config_flags |= SINOWEALTH_XY_INDEPENDENT;
break;
}
}
config->dpi_count = 0;
ratbag_profile_for_each_resolution(profile, resolution) {
if (resolution->is_disabled)
continue;
/* Limit the resolution if it somehow got higher than allowed. */
{
const unsigned int max_dpi = sinowealth_get_max_dpi_for_sensor(config->sensor_type);
resolution->dpi_x = min(resolution->dpi_x, max_dpi);
resolution->dpi_y = min(resolution->dpi_y, max_dpi);
}
if (config->config_flags & SINOWEALTH_XY_INDEPENDENT) {
config->dpis.independent[resolution->index].x = sinowealth_dpi_to_raw(device, resolution->dpi_x);
config->dpis.independent[resolution->index].y = sinowealth_dpi_to_raw(device, resolution->dpi_y);
} else {
config->dpis.dpis[resolution->index] = sinowealth_dpi_to_raw(device, resolution->dpi_x);
}
dpi_enabled |= 1 << resolution->index;
config->dpi_count++;
if (resolution->is_active)
config->active_dpi = config->dpi_count;
}
config->disabled_dpi_slots = ~dpi_enabled;
/* Body lighting */
if (drv_data->led_count > 0) {
led = ratbag_profile_get_led(profile, 0);
switch (led->mode) {
case RATBAG_LED_OFF:
config->rgb_effect = RGB_OFF;
break;
case RATBAG_LED_ON:
config->rgb_effect = RGB_SINGLE;
config->single_color = sinowealth_color_to_raw(device, led->color);
break;
case RATBAG_LED_CYCLE:
config->rgb_effect = RGB_GLORIOUS;
config->glorious_mode = sinowealth_led_to_rgb_mode(led);
break;
case RATBAG_LED_BREATHING:
config->rgb_effect = RGB_BREATHING7;
config->breathing7_mode = sinowealth_led_to_rgb_mode(led);
config->breathing7_colorcount = 1;
config->breathing7_colors[0] = sinowealth_color_to_raw(device, led->color);
break;
}
ratbag_led_unref(led);
} else {
/* Reset the value in case we accidentally managed to set it when we were not supposed to. */
config->rgb_effect = RGB_NOT_SUPPORTED;
}
}
static int
sinowealth_commit(struct ratbag_device *device)
{
int rc = 0;
struct ratbag_profile *profile = NULL;
ratbag_device_for_each_profile(device, profile) {
sinowealth_update_config_from_profile(profile);
sinowealth_update_buttons_from_profile(profile);
}
rc = sinowealth_write_configs(device);
if (rc)
return rc;
rc = sinowealth_write_buttons(device);
if (rc)
return rc;
rc = sinowealth_write_macros(device);
if (rc)
return rc;
ratbag_device_for_each_profile(device, profile) {
if (profile->debounce_dirty) {
rc = sinowealth_set_debounce_time(device, profile->debounce);
if (rc)
return rc;
}
break;
}
return 0;
}
static void
sinowealth_remove(struct ratbag_device *device)
{
ratbag_close_hidraw(device);
free(ratbag_get_drv_data(device));
}
struct ratbag_driver sinowealth_driver = {
.name = "Sinowealth",
.id = "sinowealth",
.probe = sinowealth_probe,
.remove = sinowealth_remove,
.commit = sinowealth_commit,
.set_active_profile = sinowealth_set_active_profile,
};
Reference in New Issue View Git Blame Copy Permalink