Theoretical case is where some profiles cannot be set to be the default, but
realistically: this is a profile-specific attribute so let's move the flag
there.
Arguably, the DBus API should not expose SetDefault() where not available, but
that's a separate issue.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
We don't want anyone to rely on a specific content of the ID, e.g. by
hardcoding hidraw/event node numbers. So let's make this an opaque list with
no meaning other than "this is a rodent".
This is solely for the benefit of ratbagctl which uses these IDs as access
identifier.
This doesn't affect ratbag-command which still uses device paths. It also does
not affect the object path. And piper shows the device name anyway.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
We started with event nodes for some reason lost in the distant past (probably
because that's what a lot of other tools use). But since we exclusively deal
with hidraw devices here and event nodes only serve to look up the hidraw
node, let's get rid of that indirection layer and work with hidraw directly.
Note that changes how ratbagctl works, it used the event nodes before. So
anyone who hardcoded the event node in one way or another is going to see
breakage. Then again, the "eventX" string was the device ID as advertised by
ratbagd, so it's supposed to be treated as an opaque string anyway.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Strings on DBus need to be valid UTF8, some of the default profile names on
the G700 include the degree character (" Profile n° 1"), the whole string ends
up being invalid UTF8.
This results in two issues:
- ratbagd gets quietly kicked off the bus when it sends that string
- ratbag-command throws an exception because Python is unhappy about the
non-UTF8 string:
UnicodeEncodeError: 'utf-8' codec can't encode character '\udcb0' in position 3: surrogates not allowed
The quick workaround here is to strip anything that's not ASCII from the
profile name. The same may be necessary for some device names too, but let's
wait until we see that.
For ratbag-command we convert the string to bytes and back using the 'ignore'
argument, this way we should see the original profile string without the
printf errors.
This is an incomplete fix, we'll have the same issue if a user tries to set a
non-ASCII name. The long-term fix is to convert whatever we have (probably ISO
8859-1, but can we detect that?) into UTF8 before passing it around. That
would also mean converting it back before writing to the device.
Fixes#617
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
We don't install the default SVGs anymore and all the effort for new mice goes
into the gnome theme.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This isn't used by anything in the tree and Piper doesn't use it either.
(`ratbagctl` queries it from the sodipodi name in the SVG).
Plus, assuming we run sandboxed the filename is useless anyway, `GetSvgFd()`
takes care of this bit though.
So let's drop this.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Schedule the actual operation as a callback to handle at the end of the event
loop and return success. The Resync signal will handle the rest.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
ratbagd is not something that needs stay around forever just because we
configured a mouse once. We have DBus activation and we don't store anything
anyway, so we might as well exit after a period of inactivity (20 min).
There's a slight race condition where if something comes in at exactly the
20min mark, we may shut down anyway and the messages get lost. This is too
narrow to worry about.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If we're sandboxing the client we don't have access to the SVG files directly.
So pass a read-only file descriptor to the client over DBus and let them deal
with the SVG that way.
In ratbagd.py we pull the fd off but we convert the quirky dbus error into a
normal FileNotFoundError(), much easier to catch in the caller.
On the ratbagctl side we now have to search the SVG for it's name - stored in
the 'sodipodi:docname' attribute by Inkspace. This isn't guaranteed to exist
or be always correct, but meh, it's close enough. We could continue to use the
GetSvg() call here but I want to deprecate that and remove it in the near
future.
Fixes#521
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Without --verbose ratbagd just starts up with no message whatsoever. It's hard
to tell if any devices are supported or if the server just hangs. Let's log
the devices detected by default, at least that way we get some feedback.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Make sure we log an error if any of these fail, because most really never
should, they're scaffolding we rely on to send the data. Some of these calls
(the *_read() ones) could fail if a client sends wrong data, but we might as
well log that.
This patch only wraps calls that reply on the bus, normal sd_bus_* calls that
we catch the error ourselves are handled as before.
Likewise, any errors from libratbag are left as-is. We somewhat rely on
libratbag to log something and such errors are not a failure of the actual
scaffolding.
This should make errors like https://github.com/libratbag/piper/issues/237
easier to debug.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Clients e.g. ratbagctl ask for all properties, so this getter gets
called often even if the button is not a special action.
We do not want to send the value for an invalid special action as
that is negative 1. Converting to unknown is good enough here so
let's just remove the error logging and convert in silence.
Before we send something as "u" down DBus, check that it's not -1, a commonly
used error code in libratbag. If so, return a dbus error instead and log where
this occured so we can fix it.
This should at least help spot these errors quickly while at the same time
hopefully not crashing piper anymore.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
When using ratbagctl.devel we would use the .device files
from the source dir. This patch also makes it use the .svg
files from the source dir. This makes it easier to edit the
svg and less surprising now that it follows the .devices files.
To match the source file layout the .devices files are now
installed into a 'devices' subdirectory.
To be able to query which modes are available.
Exposed via ratbagctl as
./build/ratbagctl.devel led 0 capabilities event4
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Previously, we could get a min/max value but there was no guarantee that it
any value in between would actually work on the device. Some devices have a
discrete number of resolutions (e.g. 500, 1000, 2000, 2500), most others have
at least a minimum step size (so 1234 isn't a valid dpi value).
Change the min/max to a discrete list of which resolutions are supported. This
allows a UI to adjust its interface dynamically - e.g. a combobox if there are
only 3 resolutions or a slider if there are a million of them.
This is a DBus API break
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
A driver is supposed to know what type an LED is, unknown doesn't help anyone
here. So replace this with a private #define and abort when a driver doesn't
set the type. This also adds a requirement that any driver initializing a LED
must have the read_led() function, otherwise we can't fill it in correctly.
And bump the enum up by one, the first valid value should start at 1 (or some
other non-boolean value).
Related #365Fixes#364
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The initial value of 400 in the enum is chosen so it looks weird when someone
tries to interpret the value as integer. Values of 1, 2, 4, etc. could be
confused with something realistic.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Plan is to remove the key mapping altogether and make it transparent from the
Macro mappings (in libratbag/the drivers). Meanwhile, remove the DBus API so
nothing can actually start using it.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
It always bothered me that it was in the middle of the normal ratbagd, which
made fiding it more effort than neccessary. Split it out into a separate file
so it's easily identifiable.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
